Showing all 2280 results
0445010258,0 445 010 258, 22100-w010,22100w010 FUEL INJECTION PUMP VANE PUMP & CAM SHAFT TOYOTA ETIOS
0445010758 COMMON RAIL FUEL INJECTION PUMP MERCEDES BENZ 0445010758 A6540700301 A6540704501 6540700301 6540704501.
0445020515, 0 445 020 515 Fuel Injection Pump For Bharat Benz
0445110250 FUEL INJECTOR FORD ENDAVOUR common rail injector mazda
0445110369,0445110647,0445110646,03L130277J SKODA LAURA FUEL INJECTOR
0445110441 MAHINDRA GENIO INJECTOR REPLACEMENT NO 0445110580
0445110506 FUEL INJECTOR FOR TATA CRI 2-16 BOSCH SERIES
0445110525 FUEL INJECTOR MAHINDRA QUANTO 1.5LT
0445110557 FUEL INJECTOR MAHINDRA BOLERO 2.5LT
0445110709, FKS00100 ASHOK LEYLAND COMMON RAIL FUEL INJECTOR
0445110790 FUEL INJECTOR LEYLAND DOST
0445120383,5317323 fuel injector CUMMINS INDUSTRIAL ENGINE
0460414197 TEST PLANS FOR FUEL INJECTION PUMP, ORDER GENUINE PARTS FROM TURBO TECH ENGINEERS
PUMP AND CUSTOMER DATA PUMP DATA Edition 30.06.00 Part no. 0 460 414 197 Pump designation VE4/11F1600R857 CUSTOMER DATA Customer M&M Mumbai Engine MDI 3200 Power 44 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Calibrating oil return temp. °C 55 54.0 56.0 Overflow restriction mm 0.75 Inlet press. bar 0.35 0.30 0.40 Test nozzle holder assembly 1 688 901 027 Opening pressure bar 250.00 247.00 253.00 Test pressure line 1 680 750 073 Outside diameter mm 6.00 x Inside diameter mm 2.00 x Length mm 450 SETTINGS/TEST SPECIFICATONS ASSEMBLY AND ADJUSTMENT DIMENSIONS CAT Designation Unit Set value min. max. Actual values OT Dimension K mm 3.7 3.6 3.8 MS1 dimension mm 1.2 1.1 1.3 Start of delivery blocking S Plunger stroke mm 1.29 1.27 1.31 S Outlet A SETTING CONTROL LEVER POSITION Control lever spacing YA mm 37.0 36.0 38.0 Control lever spacing YB mm 54.1 51.1 57.1 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SUPPLY PUMP PRESSURE D speed rpm 1500 1500 S Supply pump pressure bar 9.2 8.7 9.7 TIMING DEVICE TRAVEL D speed rpm 1500 1500 S Timing device travel mm 4.00 3.80 4.20 IDLE CAT Designation Unit Set value min. max. Actual values OT IDLE SETTING S Delivery cm3/1000S. 11.40 9.40 13.40 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 5.00 FULL-LOAD SPEED REGULATION CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1735 1735 S Delivery cm3/1000S. 41.00 39.00 43.00 STARTING FUEL DELIVERY CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Customer ID No. Combination ID No. 0460414197 CAT Designation Unit Set value min. max. Actual values OT D speed rpm 100 100 S Delivery cm3/1000S. 63.00 43.00 83.00 START TRANSITION D speed rpm 300 300 S Delivery cm3/1000S. 70.00 60.00 80.00 INJECTION-PUMP TEST SPECIFICATIONS TIMING DEVICE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1500 1500 S Timing device travel mm 4.00 3.80 4.20 C Timing device travel mm 4.00 3.30 4.70 D speed rpm 1200 1200 S Timing device travel mm 1.30 0.80 1.80 C Timing device travel mm 1.30 0.60 2.00 D speed rpm 960 960 S Timing device travel mm 0.10 0.00 0.20 C Timing device travel mm 0.10 0.00 0.20 SUPPLY PUMP PRESSURE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1500 1500 S Supply pump pressure bar 9.2 8.7 9.7 D speed rpm 500 500 S Supply pump pressure bar 6.5 6.0 7.0 OVERFLOW CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1600 1600 S Delivery cm3/10s. 172.2 144.5 199.9 S Delivery l/h 62.00 52.00 72.00 C Delivery cm3/10s. 172.2 130.6 213.8 C Delivery l/h 62.00 47.00 77.00 D speed rpm 500 500 S Delivery cm3/10s. 136.1 119.5 152.7 C Delivery cm3/10s. 136.1 113.9 158.3 DELIVERY AND BREAKAWAY CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1925 1925 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 D speed rpm 1850 1850 S Delivery cm3/1000S. 23.00 17.00 29.00 C Delivery cm3/1000S. 23.00 17.00 29.00 D speed rpm 1735 1735 S Delivery cm3/1000S. 41.00 39.00 43.00 C Delivery cm3/1000S. 41.00 35.00 47.00 D speed rpm 1600 1600 S Delivery cm3/1000S. 48.50 45.50 51.50 C Delivery cm3/1000S. 48.50 44.50 52.50 D speed rpm 960 960 S Delivery cm3/1000S. 51.50 51.00 52.00 C Delivery cm3/1000S. 51.50 48.50 54.50 D speed rpm 500 500 S Delivery cm3/1000S. 36.00 33.00 39.00 C Delivery cm3/1000S. 36.00 32.00 40.00 IDLE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 340 340 S Delivery cm3/1000S. 11.40 9.40 13.40 C Delivery cm3/1000S. 11.40 5.40 17.40 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Customer ID No. Combination ID No. 0460414197 CAT Designation Unit Set value min. max. Actual values OT D speed rpm 450 450 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 SHUTOFF CAT Designation Unit Set value min. max. Actual values OT MECHANICAL SHUTOFF D speed rpm 1600 1600 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
0460426432 FUEL INJECTION PUMP TEST PLAN
Part no. 0 460 426 432 Pump designation VE6/12F1200R908-9 Engine HA 6 DTI 2 N Power 122.0 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Calibrating oil return temp. °C 55.0 54.0 56.0 Overflow restriction mm 0.75 Inlet press. bar 0.35 0.30 0.40 Test nozzle holder assembly 1 688 901 027 Opening pressure bar 250.0 247.0 253.0 Test pressure line 1 680 750 073 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 450.00 SETTINGS/TEST SPECIFICATONS ASSEMBLY AND ADJUSTMENT DIMENSIONS CAT Designation Unit Set value min. max. Actual values OT LDA/HBA stroke mm 6.14 Dimension K mm 3.70 3.60 3.80 Dimension KF mm 8.40 8.20 8.60 MS1 dimension mm 1.75 1.600 1.900 SVS dimension mm 0.4 0.200 0.600 Start of delivery blocking S Plunger stroke mm 1.3 1.280 1.320 S Outlet A SETTING CONTROL LEVER POSITION Control lever spacing YA mm 31.0 29.0 33.0 Control lever spacing YB mm 56.0 52.0 60.0 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SUPPLY PUMP PRESSURE D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 6.30 5.80 6.80 TIMING DEVICE TRAVEL D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.80 1.70 1.90 FULL-LOAD DELIVERY WITH BOOST PRESSURE D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.00 91.50 92.50 S Spread cm3/1000S. <=4.0 C Spread cm3/1000S. <=4.0 FULL-LOAD DELIV. WITHOUT BOOST PRESSURE D Temperature stabilization speed 1/min 2000 2000 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Page: 1 EP test values diesel fuel-injection equipment Page: 2 Customer ID No. Combination ID No. 0460426432 CAT Designation Unit Set value min. max. Actual values OT D Initial temperature °C 65 65 D speed rpm 350 350 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 48.00 47.50 48.50 IDLE CAT Designation Unit Set value min. max. Actual values OT IDLE SETTING D speed rpm 270 270 S Delivery cm3/1000S. 9.00 8.50 9.50 S Spread cm3/1000S. <=6.0 FULL-LOAD SPEED REGULATION CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 25.00 23.00 27.00 STARTING FUEL DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 100 100 S Delivery cm3/1000S. 130.00 105.00 155.00 START TRANSITION D speed rpm 250 250 S Delivery cm3/1000S. 49.00 43.00 55.00 INJECTION-PUMP TEST SPECIFICATIONS TIMING DEVICE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1150 1150 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 2.40 2.10 2.70 C Timing device travel mm 2.40 1.80 3.00 D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.80 1.70 1.90 C Timing device travel mm 1.80 1.30 2.30 D speed rpm 800 800 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 0.10 0.00 0.20 C Timing device travel mm 0.10 -0.60 0.80 SUPPLY PUMP PRESSURE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 6.30 5.80 6.80 D speed rpm 500 500 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 4.30 3.60 5.00 OVERFLOW CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/10s. 166.66 133.33 200.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 3 Customer ID No. Combination ID No. 0460426432 CAT Designation Unit Set value min. max. Actual values OT C Delivery cm3/10s. 166.66 125.00 208.33 S Delivery l/h 60.00 48.00 72.00 C Delivery l/h 60.00 45.00 75.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 500 500 D Measurement temperature °C 57 57 S Delivery cm3/10s. 111.11 88.91 133.31 C Delivery cm3/10s. 111.11 83.33 138.88 S Delivery l/h 40.00 32.00 48.00 C Delivery l/h 40.00 30.00 50.00 DELIVERY AND BREAKAWAY CURVE CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1375 1375 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 S Delivery cm3/1000S. 25.00 23.00 27.00 C Delivery cm3/1000S. 25.00 17.00 33.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 750 750 D Measurement temperature °C 57 57 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 95.00 91.50 98.50 C Delivery cm3/1000S. 95.00 90.50 99.50 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 540 540 D Measurement temperature °C 57 57 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 88.50 85.00 92.00 C Delivery cm3/1000S. 88.50 84.00 93.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.00 91.50 92.50 C Delivery cm3/1000S. 92.00 88.50 95.50 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 600 600 D Measurement temperature °C 57 57 D Aneroid pressure hPa 150 150 S Delivery cm3/1000S. 80.00 79.50 80.50 C Delivery cm3/1000S. 80.00 76.00 84.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 350 350 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 48.00 47.50 48.50 C Delivery cm3/1000S. 48.00 44.50 51.50 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 4 Customer ID No. Combination ID No. 0460426432 IDLE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 270 270 S Delivery cm3/1000S. 9.00 8.50 9.50 C Delivery cm3/1000S. 9.00 3.00 15.00 D speed rpm 325 325 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 SHUTOFF CAT Designation Unit Set value min. max. Actual values OT MECHANICAL SHUTOFF D speed rpm 1200 1200 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
28230673,28320083 TATA 4SP FUEL INJECTORS DELPHI TATA 4SP ENGINE TML3.0L 4SP-SUMO GOLD, 4SP-XENON
28338840 TATA ULTRA DELPHI Fuel INJECTOR
28407560,28253155 FUEL INJECTOR MAHINDRA BOLERO MAHINDRA MAX UPCR INJECTOR
ALFA FIAT 500 COMBO DOBLO 1.6 54389700008 TURBOCHARGER CARTRIDGE 46339846, 55263023, 55266228, 95521388, 95528359
Assembly of Service parts gear pump suitable for 0445020515, 0 445 020 515, bharat Benz, 1462C20987, 1 462 C20 987
Audi A4 Fuel Injection Pump 0445010646 CP4
Audi A4 Fuel Injection Pump 0445010611, 0445010632, 0445010639 .0445010640, 0445010640, 0445010644, 0445010646, 04450106590445010669, 0445010671, 0445010673, 0445010674, 0445010685, 0445010686, 0445010692, 0445010694, 059130755AB, 059130755AG, 059130755AH, 059130755AL, 059130755BB, 059130755BC, 059130755BD, 059130755BE, 059130755BK, 059130755BL, 059130755BS, 059130755BT, 059130755T0986437404, 0986437435, 95811031621, 95811031622, CRCP4HS2R7540, CRCP4S2R6540, CRCP4S2R6540S
Audi Fuel Injector A4 A5 A6 Q5 Q7 VW TOUAREG 0445116023, 0445116022, 0445116015
BMW New Bosch Injector 0445115008,0445115070,0445115077, BMW 7792721, 0445115008, 0445115048, 0445115070 ,0445115077, 0445115050, 780808903
BOLERO POWER PLUS FUEL INJECTOR 0445111083 BS6 3 CYL
BOSCH COMMON RAIL FUEL INJECTION PUMP 4306517, F00BC00016, F00BC00051 SUITABLE FOR CUMMINS QSK ENGINES
BOSCH COMMON RAIL FUEL INJECTOR 0445110884
Bosch Common Rail Injector (CRIN4) for Mercedes Benz, 0445120287, 0445120288, 0986435624, 4710700587, A4710700587
BOSCH COMMON RAIL INJECTOR 0445110498, 0305BAM00270N MAHINDRA 2.2L EURO 5 2012.
BOSCH CRANKSHAFT SENSOR 0261210113
BOSCH DIESEL INJECTOR FOR JAGUAR,LAND ROVER,FREELANDER 2, 0445116043,9687454480, 02JDE36716,LR056366,LR022335
Bosch Fuel injection Pump Suction Valve CP3 0445020037, 0445020047, 0445020048, F00N202354
0 445 020 037 Radial Piston Pump CR/CP3HS3/R110/30-789S, 0 445 020 047 Radial Piston Pump CR/CP3HS3/R110/30-789S, 0 445 020 048 Radial Piston Pump , R/CP3HS3/R110/30-789S, 0 445 020 049 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 050 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 072 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 076 Radial Piston Pump CR/CP3HS3/R110/30-789S, 0 445 020 099 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 100 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 101 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 105 Radial Piston Pump CR/CP3HS3/R110/30-789S, 0 445 020 106 Radial Piston Pump CR/CP3HS3/R110/30-789S, 0 445 020 107 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 110 Radial Piston Pump CR/CP3HS3/L110/30-789S, 0 445 020 113 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 129 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 136 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 137 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 146 Radial Piston Pump CR/CP3HS3/R110/30-789S
0 445 020 148 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 156 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 167 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 169 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 206 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 207 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 278 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 286 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 300 Radial Piston Pump CR/CP3HS3/L110/30-789S
0 445 020 315
BOSCH FUEL INJECTION UNIT PUMP 0414750003, 02112707, 2112707, 20460075 FOR VOLVO
BOSCH FUEL INJECTION UNIT PUMP 0414799008 Mercedes
BOSCH FUEL INJECTOR 0445110698
Bosch Fuel Unit Pump ED0065902900-S, 4896882, 6590290, 0414001003 for Lombardini LDW702, LDW1003, LDW1404, LDW1204/T Kohler KDW702, KDW1003, KDW1404
Bosch Injector 0445110653, 0445111019, 0445110654, 024J813375, LR073710, G4D3 9K546 AA, G4D3-9K546-AA
BOSCH MANIFOLD ABSOLUTE PRESSURE(MAP) SENSOR 0281006171
Camshaft Bharat benz 0445020515, A4000700101, 4000700101, Fuel injection pump Camshaft, 1466C05043
CB28 Fuel injection pump Housing F 019 D04 033, F019D04033, CB28 suitable for 0445025608, 0445025618
Common Fuel Injector 23670-0E070,Toyota Hilux 2GD Fuel Injectors 6 Pins,23670-09460 for Toyota Hilux Revo Innova Fortuner 2.4L Diesel
Common Rail 0 445 214 041, 0445214041 Suitable for Jeep Cherokee KJ 2.8 CRD, CHRYSLER 35022088H, VM (MOTORI/STABILIMENTI MEC) 35022088G
Common Rail 9199-197
The part number "9199-197" you've mentioned appears to be a reference to a common rail component. Common rail systems are commonly used in diesel engines to deliver fuel to the injectors with high precision. The specific part you're referring to is likely associated with a particular manufacturer or supplier. To get more detailed information about this common rail component, its application, or compatibility, I would recommend contacting the manufacturer or an authorized parts distributor who can provide you with the specifics about the part and its use in various engine systems.
Common Rail Cr Valve F00RC01064, F00RC00252, Suitable for 0445124007, 0445124042 VOLVO EC350 0445124007, 0 445 124 007, 0445124042, 0 445 124 042, 04909358, 4909358
COMMON RAIL CR VALVE F00RJ02035 SUITABLE FOR 0445120398
Common Rail Cr VALVE F00RJ02266 Suitable for 0445120126, 0 445 120 126, 32G61-00010, 32g6100010, 0986AM0065
COMMON RAIL CR VALVE SUITABLE FOR 0445111077 TATA ACE F00ZC01067
Common Rail Cr Valve Suitable for 0445111113, 0305BBH00051N Mahindra Bolero, Mahindra Thar, Mahindra Supro, F00zc01958
Common Rail Diesel Fuel Injector 0445120360, 0 445 120 360, 0445 120 360, Suitable For SAIC HONGYAN Engine
Common Rail Fuel Injection Feed Pump 137-5541 For Caterpillar CAT 3116 3126 3208 C7 C9 C15 C10 C12 C11 3304 C18
Common Rail Fuel Injection Pump 0 445 020 002, 0445020002 Suitable for Citroen Fiat Iveco Peugeot Renault
Common Rail Fuel injection Pump 0445010414, 55253490, 55243307, 15200-62M01, 15200-62M01-000, 1.6LT Scross
COMMON RAIL FUEL INJECTION PUMP 0445020073, 0 445 020 073, 51.11103.7783, 51111037783, 51 11103 7783 MAN TRUCK
Common rail Fuel injection pump 0445020335, 0 445 020 335, 5802206690, Iveco Engine, Case, New Holland
Common Rail Fuel injection pump 0460426516, 0 460 426 516, 5290007, 5 290 007 tata hitachi excavator
COMMON RAIL FUEL INJECTION PUMP 28436232, 278907100101 SAFARI 2.2, TATA XENON 2.2 LT ENGINE DELPHI TVS
Common rail fuel injection pump DRV suitable for Mahindra Scorpio 0445010131, 0305BC0371N, 0305BC0830N, 0928400636
Common Rail Fuel Injection Pump Eccentric Shaft for 0445010463, F 01M 100 949, F01M100949
Common Rail Fuel injection pump Flange suitable for 0445020515, 0445020617, 0445020548, 1 462 C58 999, 1462C58999, CP4 fuel pump Flange
COMMON RAIL FUEL INJECTION PUMP MAN TRUCK 0445020204, 0 445 020 204, 51.11103.7849, 51111037849, 51 11103 7849
Common Rail Fuel injection pump Oil Seal CP4, 0445020515, 0445020548, 0445020617, 0445010533, 0445010617
Common Rail Fuel Injection Pump Plunger 0445010494, 0305BAM01551N Suitable for BOLERO POWER PLUS BS6
Common Rail Fuel injection pump Plungers TATA Shinrai Engine V3800-CR-TI-INF-02, 1J508-50501, 1j50850501, Kubota Engine, HP5S-0020, 299000-0020
Common Rail Fuel injection pump Pressure Valves HP5, 1J508-50501, 299000-0020, 22100-0e010, 22100-0e020, 31452143
Common rail Fuel injection pump X57507300005, 0445020139, CR/CP3HS3/R110/30-789VS, 1800bar, MTU Engine
Common Rail Fuel injectior BMW 0445110616, 0445110617, 0445110595, 0445110478, 0445110478, 0445110479, 0445110480, 0445110382
COMMON RAIL FUEL INJECTOR 0445116018, 0445116017, 33800-2F000 FOR HYUNDAI SANTA FE
Common Rail Fuel Injector 0 445 110 293, 0445110293, 0 445 110 407, 0445110407 for Great Wall Motors
Common Rail Fuel Injector 0 445 110 355, 0445110355, 0 445 110 509, 0445110509 For FAW CA4D Truck CHANGFENG Yangzi Pickup 2.8D
Common Rail Fuel Injector 0 445 110 376, 0445110376, 0 445 110 594, 0445110594 for Cummins Isf 2.8 Foton Jac Gaz
Common Rail Fuel Injector 0 445 110 823, 0445110823, 4D32XG30-22000 Suitable for Yuchai Engine, Xinchai Engine
Common Rail Fuel Injector 0 445 120 106, 0445120106, 0 445 120 310, 0445120310 for DongFeng DC11_EDC7
Common Rail Fuel Injector 0 445 120 239, 0445120239, 5263312 Suitable for Cummins ISB QSB5.9 diesel engine
Common Rail Fuel Injector 0445110382, 044-5110-382 for BMW X3 F25 E90 F30 F10 F11 520d 530d 320d 330d
COMMON RAIL FUEL INJECTOR 0445110425, 0445110450, J55577044, 55577044, J55580135 CHEVROLET BEAT, CHEVROLET SAIL , CHEVROLET ENJOY
COMMON RAIL FUEL INJECTOR 0445110439, 0 445 110 439 GENUINE BOSCH
COMMON RAIL FUEL INJECTOR 0445110497 GENUINE BOSCH
COMMON RAIL FUEL INJECTOR 0445110746,0 445 110 746
COMMON RAIL FUEL INJECTOR 0445110748 ISUZU D-MAX
COMMON RAIL FUEL INJECTOR 0445110956 MAHINDRA BOLERO BS6
COMMON RAIL FUEL INJECTOR 0445111077,571001160106 SUITABLE FOR TATA INTRA
Common Rail Fuel Injector 0445115068, 044-5115-068, 0445115069 for A6460701187, A6460701487 for Mercedes
Common Rail Fuel Injector 0445120019, 0445120020, 0445120084, 503135250, 5010477874, 501550956, 5010550956, D5010477874, 500477874
Common Rail Fuel Injector 0445120036 Suitable for Iveco Engine, Iveco Daily 35C17 / 35S17 / 40C17 / 50C17, 504047895, 504086469
Common Rail Fuel Injector 0445120073, 044-5120-073, F01G09P1H4, 107755-0230 for MITSUBISHI FUSO 3.0L ME194299, ZDTOPA
COMMON RAIL FUEL INJECTOR 0445120075,0 445 120 075,2855135,504128307
Common Rail Fuel Injector 0445120203, 0 445 120 203, 0986435658 for 51101006090, 51101006131 Diesel Engine
Common Rail Fuel injector 0445120218, 0445120030, 0 445 120 218, 0 445 120 030, 51.10100.6035, 51.10100.6048, 51.10100.6032, Man Truck
COMMON RAIL FUEL INJECTOR 0445120361,5801479314,IVECO Cursor 9
COMMON RAIL FUEL INJECTOR 0445120383,5317323 QSB EURO 4
COMMON RAIL FUEL INJECTOR 0445120404 , 5306050 CUMMINS QSB 5.9
COMMON RAIL FUEL INJECTOR 0445120459,0 445 120 459 FOR WEICHAI ENGINE
Common Rail Fuel injector 0445120723, 1003417401, WPCR101, Suitable for SDLG L958H Wheel Loader, Weichai Engine WP7GE5, WP7G234E501 Engine
Common rail fuel injector 095000-0210 095000-0211, 095000-0213, 095000-0214 for FH/FK/FM ME132615, ME302570
Common Rail Fuel Injector 095000-5270, 095000-5271, 095000-5273, 095000-5274, for HINO J08E-VM, 23670-E0250, 23670e0250, SK350-8, Kobelco 350
Common Rail Fuel Injector 095000-6280, 0950006280 Suitable For Hino Truck KOMATSU SAA6D170 WA900-3 730E HD785-7
Common Rail Fuel Injector 095000-6631, 16650-Z600E, 9709500-663 Suitable for DENSO diesel engine MD9M NISSAN LORRY
Common Rail Fuel Injector 095000-7500, 1465A257, 1465A297, 1465A279 Suitable For Denso Mitsubishi Pajero
Common Rail Fuel injector 1j508-53053, 1j50853053, 1j508-53052, 1j50853052 suitable for Kubota engine
Common Rail Fuel Injector 21371672, 21340611, 20972225, 20584345 Suitable for Volvo D13A D13D engine
Common Rail Fuel Injector 232-1183 for Caterpillar CAT Engine 3408 3408C 3408E 3412 3412E Truck D10N D9L D8L 773E
Common Rail Fuel Injector 236-0962, 2360962 Suitable For Caterpillar CAT 330C Engine C9 2360962 E320D MT745
Common Rail Fuel Injector 23670-30170 for Toyota Dyna Hiace Hilux Land Cruiser 1KD-FTV, D-4D, Euro 5 Engine
Common Rail Fuel Injector 23670-30440 for Toyota
The Common Rail Fuel Injector with part number 23670-30440 is indeed used in certain Toyota vehicles. Common rail fuel injection systems are a type of fuel injection system used in modern diesel engines to improve fuel efficiency and reduce emissions. The specific compatibility of this injector with Toyota vehicles may vary depending on the engine and vehicle model. It's essential to ensure that the part number matches the one you need for your particular Toyota vehicle.
Common Rail Fuel Injector 3349861, 3609962, 3095773, 3609849 K38 K50 Diesel Engine Spare Part For Cummins
Common Rail Fuel Injector 3707282, 370-7282, 295050-0401, C6.4 / C6.6 / C4.4 Suitable for HINO 700Series
Common Rail Fuel Injector 387-9427, 3879427 10R7225 Suitable For CAT CATERPILLAR C7 Engine E320D E330D Excavator 20R1926 3282585, 3879427, 2951411
Common Rail Fuel injector 4326780, 4088427, 4087893, 4001813, 4010025, QSK60, QSK45 Engine Parts for Cummins QSK60
Common Rail Fuel Injector 5561480
The part number "5561480" refers to a common rail fuel injector. Common rail fuel injectors are a key component of modern diesel engines. They are responsible for delivering precisely metered amounts of fuel into the combustion chamber. The part number you've mentioned could be associated with a specific manufacturer or supplier, and it's important to ensure that the injector is compatible with your engine model and application.
Common Rail Fuel Injector 6156-11-3300, 6156113300, 6156-11-3301, 095000-1211, 095000-1210 for Komatsu
Common Rail Fuel Injector 6754113011, 6754113010, 6754113012, 5263262NX with Cummins Engine 6BT QSM11 ISB
Common Rail Fuel Injector A2C8139490080, CK4Q-9K546-AA , CK4Q9K546-AA, CK4Q9K546AA Suitable for Ford Ranger 2.2 TDCi
Common Rail Fuel Injector A2C8139490080, CK4Q-9K546-AA , CK4Q9K546-AA, CK4Q9K546AA, Ford Endeavour 5 cylinder Engine
COMMON RAIL FUEL INJECTOR BOSCH 0445110411,0445110410,33800-2A800,33800-2A960,0986435279 HYUNDAI 1.7LT
Common Rail Fuel Injector Connector F00rj01620, 3975703, F 00r J01 620 For Injector 0445120125, 0445120236
Common rail fuel injector connector suitable for 295050-1860, 22033416, 295050-1861, 295050-1862, 295050-1863, 295050-1864
Common Rail Fuel Injector Continental Kia Hyundai Injector 338002U000, 33800-2U000 Suitable For Hyundai Tucson
Common Rail Fuel Injector CR Valve 0445110320, 33800-2a900, 338002a900 suitable for Hyundai F00VC01347
Common Rail Fuel injector Cr Valve TATA ULTRA 0445111010, 0 445 111 010, 00570601160106, 570601160106
Common Rail Fuel Injector Cr Valve, Orifice Plate B3Y04001, 295050-2650, 095000-2650, G3S135 Suitable for Ashok Leyland
Common Rail Fuel Injector Cr Valve, Rod B3Y04001, 295050-2650, 095000-2650, G3S135 Suitable for Ashok Leyland
COMMON RAIL FUEL INJECTOR FOR EICHER TRUCK 0445110415
COMMON RAIL FUEL INJECTOR FOR SANY LOADER WITH MITSUBISHI ENGINE 0445110661,0 445 110 661,32r6100020,60268485
Common Rail Fuel Injector Hino P11c Euro6 095000-9030, 095000-9030, 23670-E0520 Kobelko 480, Kobelco 500, Kobelco 450 excavator
COMMON RAIL FUEL INJECTOR HONDA AMAZE I-DTECH 0445110547
COMMON RAIL FUEL INJECTOR IVECO 0445120057,2854608
COMMON RAIL FUEL INJECTOR MAHINDRA SCROPIO CRDe 2.6lt 0445110260,0 445 110 260
COMMON RAIL FUEL INJECTOR MAHINDRA SUPRO EURO6 0445111092, 0305BAU00691N
Common Rail Fuel Injector Nozzle Dlla153p1270, 0433171800 Suitable for 0445110155, 0445110156, 0445110176, 0445110177, 0445110193, 0445110194
COMMON RAIL FUEL INJECTOR NOZZLE SUITABLE FOR PERKINS 7.1 ENGINE DLLA133P2379, 0445120348, 0445120347, T4 10631
COMMON RAIL FUEL INJECTOR REPAIR KIT ISUZU 4HK1 EURO5 095000-1520, 095000-8630, 8-98243863-0, 8982438630
Common Rail Fuel injector Smart EUI VOLVO F2 series by Delphi 22459522, 7422459522, 22569105, 7422569105, 85020361, BEBJ1F11201
COMMON RAIL FUEL INJECTOR TEMPO TRAVELLER 0445110189, 0445110190, 0986435055, 6110701687, A6110701687
Common Rail Fuel Injector Toyota Innova 2.5lt 23670-0L010, 236700L0100,23670-30300, 095000-7760, 095000-7761
Common Rail Fuel injector VOLVO EC350 0445124007, 0 445 124 007, 0445124042, 0 445 124 042, 04909358, 4909358
COMMON RAIL FUEL INJECTOR WEICHAI ENGINE WP10 0445120214,612600080924
COMMON RAIL INJECTOR 0445116013, 0445116050, 0445116051, 0445116065 FOR RANGE ROVER, LAND ROVER, JAGUAR
COMMON RAIL INJECTOR 0445120141 FOR MMZ,MINSK TRACTOR
COMMON RAIL INJECTOR FOR MAN TRUCK 0445120314
COMMON RAIL NEW HOLLAND, IVECO, CASE ENGINE 0445226054, 504124845, 504373407, 504124845, 504373407, 5043734070, 504124845
Common Rail Nozzle G3s151 Suitable for Volvo Common Rail Fuel Injector 23070715,095000-3040, 294050-3040
Common Rail Nozzle Suitable for 0445111113, 0305BBH00051N Mahindra Bolero, Mahindra Thar, Mahindra Supro, DLLA152P2780
Common Rail Nozzle Suitable for DLLA142P2337, 0445110561, 0 433 172 337, 0433172337 Fuel injector
Common Rail pressure DRV 31412-2F600, 0281006405, 0 281 006 405, 314122f600, 0445214320, 0445214321, 0445214322, 0445214323, 0445214350, 0445214351
Common Rail Pressure DRV A6480700046 Mercedes Benz 0281002682, 6480700046, 0445214129, 0445214166, 0445215016, 0445216011
Common Rail Pressure Sensor 0281002504, 0 281 002 504, 059130758, 0041536728, A0041536728
Common Rail Pressure Sensor 0281006325, 5297641, 5260246, 3974092, 1705135, 42574913, BG6X-9f479-CA, 42567283, 2T2906051B
Common Rail Pressure sensor 0281007017, 46337642, 55277611, 0445214359, 0445214364, 0445214394, Jeep Compass
Common Rail Pressure Sensor 03L906054A03L, 130089AA48B, 13640B0503L, 130089S03L, 130089R, 03L130764C, 03L130764B, 48B13640B05
COMMON RAIL PRESSURE SENSOR 45PP3-1 DENSO 45PP3-1, 45PP31, 1570P1, 12131913818, 1497163, 8C1Q-9D280-AA
Common Rail Pressure sensor Audi, BMW, Mercedes 0281002842, 0281002843, 0281002505
COMMON RAIL SOLENOID F00RJ02703 MAGNET ASSLY
COMMON RAIL SOLENOID MAGNET ASSLY F00RJ02703 SUITABLE FOR 0445120030,0445120044,0445120045,0445120050,0445120053,0445120054,0445120055,0445120056, 0445120057,0445120061,0445120062,0445120063,0445120064,0445120065,0445120066,0445120067,0445120068, 0445120071,0445120074,0445120075,0445120078,0445120080,0445120081,0445120083,0445120086,0445120087, 0445120092,0445120098,0445120099,0445120100,0445120101,0445120102,0445120105,0445120107,0445120110, 0445120116,0445120117,0445120118,0445120124,0445120127,0445120128,0445120129,0445120130,0445120131, 0445120134,0445120135,0445120136,0445120137,0445120138,0445120139,0445120141,0445120142,0445120143, 0445120145,0445120146,0445120147,0445120148,0445120149,0445120150,0445120153,0445120154,0445120155 0445120156,0445120157,0445120160,0445120161,0445120162,0445120163,0445120164,0445120167,0445120168,0445120169 0445120170,0445120177,0445120178,0445120179,0445120180,0445120182,0445120183,0445120184,0445120185,0445120186,0445120186,0445120188 0445120193,0445120196,0445120197,0445120199,0445120200,0445120201,0445120203,0445120204,0445120213,0445120214,0445120215,0445120217,0445120218 0445120219,0445120220,0445120224,0445120225,0445120226,0445120227,0445120228,0445120229,0445120233,0445120235,0445120242,0445120244,0445120245 0445120247,0445120257,0445120258,0445120260,0445120261,0445120262,0445120263,0445120265,0445120266,0445120267,0445120268,0445120269
COMMON RAIL VALVE FOR CRDI INJECTOR F00ZC01319, F 00Z C01 319
Connecting 3632225 Rod For CUMMINS KTA50, KTA38
The connecting rod, with part number 3632225, is a component used in Cummins KTA50 and KTA38 engines. The connecting rod is a crucial component in the engine's internal structure, as it connects the piston to the crankshaft, converting reciprocating motion into rotational motion. It plays a vital role in the engine's operation, ensuring that power is transferred efficiently from the piston to the crankshaft.
Connecting Rod Bearing 3047390 KTA38, KTA50 OE
Connecting Rod Bearing 4914696 Cummins K38
The Connecting Rod Bearing 4914696 is a component used in the Cummins K38 engine. The connecting rod bearing is a critical part of the engine's internal components, as it helps reduce friction and wear between the connecting rod and the crankshaft. It plays a key role in ensuring the smooth operation and longevity of the engine.
CONTINENTAL COMMON RAIL A2C27000234, 5WS40440, H8200704217, 8200704212 FOR NISSAN TERRANO, NISSAN LODGE, RENAULT LAGUNA
CP4 Fuel injection pump Plunger 1 462 C53 998, 1462C53998, Part Set Cylinder head suitable for 0445020548, for tata ultra fuel injection pump
Cummins Fuel injector 3076130 K19 ENGINE, KTA19, Cummins STC Injectors
CUMMINS INLINE 6 SCANNER with insite 8.7 AND ECM PASSWORD UNLOCKING
Cummins Piston Kit 3804885 W/Pin
The Cummins Piston Kit 3804885 with a pin is a component used in Cummins engines. A piston kit typically includes the piston itself, piston rings, wrist pin, and retaining clips. The piston is a crucial part of the engine's internal combustion process. It moves up and down in the cylinder, compressing air and fuel in the combustion chamber and delivering power to the crankshaft.
Delphi Common Rail Fuel Injection Pump Cat Cam Ring 2836910 Suitable For 320d2, 3981498, 398-1498, 9521a030h, Cat C7.1
DELPHI RAIL PRESSURE 55PP03-02, 55PP0302, 55PP03-01, 1319685, 8200057345, 9307Z507A, 9307Z511A, 55PP0301, 28389848, 9144A010B
DENSO 095000-5474 INJECTOR ASSY FOR TATA HITACHI 6HK1 4HK1
Denso Common Rail Fuel Injector 295050-3090, 2950503090, 195000-3090, 1950003090 Suitable for Toyota, Hino Engine
Denso common rail injector 095000-5215, 0950005215, 23670E0350 for HINO P11C Kobelco SK 450 excavator
DENSO HPO FUEL INJECTION PUMP FOR KOMATSU 450 MACHINE 094000-0383,6156-71-1112,6156711112,6156-71-1111,6156-71-1111,6156711111
DENSO HPO FUEL INJECTION PUMP Repair kit FOR KOMATSU 450 MACHINE 094000-0383, 6156-71-1112, 6156711112, 6156-71-1111, 6156-71-1111, 6156711111
Diesel Fuel Common Rail EUI Injector for cat 232-1168, 2321168, 232-1167, 2321167 CAT 3412 CAT 3412 FUEL INJECTOR
Diesel Injector 20500620, 7420500620, 85000190, BEBE4C03001, BEBE4C03101 Suitable for Volvo Penta engine TAD940VE D9A, Euro 2, Euro 3, FM
DLLA 150P 1437,DLLA150P1437 NOZZLE FOR SWIFT
EICHER 4 CYL COMMON RAIL INJECTOR DENSO DESIGN 295050-1911,ID323481
Electronic Fuel Injection Pump For SY55-SY75 Diesel Pump NJ-VP4/12E1050L020, 0002070020, VE4/12E1050L108, Sany, Weifu Pump
ENGINE FUEL INJECTOR NOZZLE ASSY GE13 EUI INJECTOR,109962-0061, 109962-0042, 109962-0061, 109962-0042, UNIT PUMP
F 002 A0Z 362,F002A0Z362 FUEL INJECTION PUMP KOEL 6 CYL
Combination no. F 002 A0Z 362 Fuel-injection pump Pump designation PES6A95D320RS3500 EP type number F 002 A10 437 Governor Controller designation RSV325...750A7C1252R Controller type number F002A20086 Customer ident number KOEL CUSTOMER DATA Customer KIRLOSKAR Engine 6R1080TAG-154HP TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Inlet line 3.1 Calibrating oil inlet temp. °C 40.0 38.0 42.0 Overflow restrictor (type number) F 002 A10 627 Inlet press. bar 1.5 1.4 1.6 Test nozzle holder assembly 0 681 343 009 Opening pressure bar 173.5 172.0 175.0 Test pressure line 1 680 750 014 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 600 INJECTION PUMP SETTINGS START OF DELIVERY CAT Designation Unit Set value min. max. Actual values OT D Test pressure bar 26.0 25.0 27.0 D Rack travel mm 19.50 18.00 21.00 S Prestroke (as of BDC) mm 3.20 3.15 3.25 C Prestroke (as of BDC) mm 3.20 3.10 3.30 Cam sequence 1-5-3-6-2-4 Port-closing difference °NW 0-60-120-180 240-300 S Tolerance °NW 0.50 C Check tolerance °NW 0.75 Cylinder 1 °NW 0 Cylinder 5 °NW 60 -15 135 Cylinder 3 °NW 120 45 195 Cylinder 6 °NW 180 105 255 Cylinder 2 °NW 240 165 315 Cylinder 4 °NW 300 225 375 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SETTING D speed rpm 720 720 D Rack travel mm 13.20 13.15 13.25 S Delivery cm3/1000S. 155.00 154.00 156.00 S Spread cm3/1000S. 3.00 C Spread cm3/1000S. 6.00 D speed rpm 325 325 D Rack travel mm 4.80 4.70 4.90 S Delivery cm3/1000S. 8.00 6.00 10.00 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 5.50 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Page: 1 EP test values diesel fuel-injection equipment Page: 2 Customer ID No. KOEL Combination ID No. F002A0Z362 SETTINGS FOR INJECTION PUMP WITH GOVERNOR SLIDING SLEEVE TRAVEL/POSITION CAT Designation Unit Set value min. max. Actual values OT GUIDE SLEEVE POSITION D Control lever position ° - 3 - 3 D speed rpm 700 700 S Rack travel mm 0.50 0.30 0.70 Governor spring pre-tension click setting x 4.00 FULL-LOAD DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 720 720 D Aneroid pressure hPa 0 0 S Delivery cm3/1000S. 155.00 154.00 156.00 C Delivery cm3/1000S. 155.00 152.00 158.00 S Spread cm3/1000S. 3.00 C Spread cm3/1000S. 6.00 FULL-LOAD SPEED REGULATION/ASSEMBLY GOVERNOR CAT Designation Unit Set value min. max. Actual values OT D Control lever position ° 95.00 91.00 99.00 FULL-LOAD SPEED REGULATION S Rack travel mm 12.20 S speed rpm 755 752.0 758.0 D Rack travel mm 4.00 4.00 S speed rpm 790 780.0 800.0 D Rack travel mm 0.85 0.30 1.40 S speed rpm 950 D Rack travel mm 4.00 4.00 4.00 S speed rpm 810 IDLE CAT Designation Unit Set value min. max. Actual values OT S Control lever position ° 72.00 68.00 76.00 IDLE WITHOUT AUXILIARY SPRING D speed rpm 325 325 S Rack travel mm 4.30 4.25 4.35 D speed rpm 100 100 S CRT min. mm 19.00 C CRT min. mm 19.00 TESTING D speed rpm 325 325 S Rack travel mm 4.80 4.70 4.90 D Rack travel mm 2.00 2.00 S speed rpm 370 340.0 400.0 TORQUE CONTROL CAT Designation Unit Set value min. max. Actual values OT D speed rpm 720 720 S Rack travel mm 13.20 13.15 13.25 C Rack travel mm 13.20 13.15 13.25 IDLE DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 325 325 S Delivery cm3/1000S. 8.00 6.00 10.00 C Delivery cm3/1000S. 8.00 4.50 11.50 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 5.50 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
F002A0Z021-TEST PLAN
Test oil : F 002 S3E 001 Revision : 10 Combination No. : F 002 A0Z 021-E 040 0751 00 Injection pump : PES 3 A 90 D 320 RS 2888 Governor : RSV 325...1000 A 1 C 893 R Customer : Kirloskar Oil engines Ltd. Engine model : RV3(TMA) (I) Engine code : 60043 Application : Tractor TEST BENCH REQUIREMENTS Test oil inlet temperature : 38°-42°C Overflow valve : F002A10627 Inlet pressure in bar : 1.5 Test injector : 0681343009 Opening pressure in bar : 172.0-175.0 High pressure pipe : 6X2X600 (ODXIDxlength) in mm (A) CALIBRATION OF PUMP WITHOUT GOVERNOR ACTION Direction of rotation : Clockwise Prestroke in mm : 2.75-2.85(2.7-2.9) Control rack position in mm : 9.0-12.0 Cam sequence : 1-3-2 Cam displacement : 0-120-240° ±0.5° Tappet clearance in mm : min 0.2 Injection Timing locking : - BASIC SETTING Speed-min-1 (rpm) : 1000 Control rack travel in mm : 8.55-8.65 Delivery quantity(x ) : 4.85-5.15 in cm³/100 strokes Maximum spread in cm³ : 0.3(0.7) Speed-min-1 (rpm) : 325 Control rack travel in mm : 4.9-5.1 Delivery quantity(x ) : 0.65-1.05(0.45-1.25) in cm/100 strokes Maximum spread in cm³ : 0.5(0.7) (B) ADJUSTMENT OF PUMP AND GOVERNOR GUIDE SLEEVE TRAVEL Control lever position : Free Speed-min-1 (rpm) : 800 Control rack travel in mm : 0.3-0.7 1.MAXIMUM SPEED CONTROL (RATED SPEED) (without supplementry idling spring) Control lever position : 56.0±4.0° Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 1000 Boost pressure in bar : - Control rack travel in mm : 8.55-8.65 Speed-min-1 (rpm) : 1065-1075 Boost pressure in bar : - Control rack travel in mm : 7.6 Speed-min-1 (rpm) : 1085-1105 Boost pressure in bar : - Control rack travel in mm : 4.0 Speed-min-1 (rpm) : 1250 Boost pressure in bar : - Control rack travel in mm : 0.3-1.4 2.FULL LOAD DELIVERY Speed-min-1 (rpm) : 1000 Boost pressure in bar : - Control rack travel in mm : 8.55-8.65 Delivery quantity(x ) : 24.75-25.25(23.75-26.25) in cm³/500 strokes Maximum spread in cm³ : 1.5(3.5) 3.TORQUE CONTROL Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm :- Speed-min-1 (rpm) : 500 Boost pressure in bar : - Control rack travel in mm : 9.1-9.3 Speed-min-1 (rpm) : 700 Boost pressure in bar : - Control rack travel in mm : 8.8-9.0 Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 1000 Boost pressure in bar : - Control rack travel in mm : 8.55-8.65 Contd...2 STS-TS-KIR 2.59 e 4. COURSE OF DELIVERY Speed-min-1 (rpm) : 500 Boost pressure in bar : - Delivery quantity(x ) : 17.0-18.5(16.0-19.5) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : 700 Boost pressure in bar : - Delivery quantity(x ) : 21.0-22.5(20.0-23.5) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : - Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - 5. IDLING SPEED CONTROL (RATED SPEED) Control lever position : 26.0±4.0° Speed-min-1 (rpm) : 325 Control rack travel in mm : 4.9-5.1 Speed-min-1 (rpm) : 100 Control rack travel in mm : Minimum 19.0 Speed-min-1 (rpm) : 325 Control rack travel in mm : 4.9-5.1 Speed-min-1 (rpm) : 363-423 Control rack travel in mm : 2.0 6.MAXIMUM SPEED CONTROL (RATED SPEED) (with supplementary idling spring) Speed-min-1 (rpm) : - Control rack travel in mm : - 7. GOVERNOR CUTTING IN SPEED Speed-min-1 (rpm) : 1065-1075 Boost pressure in bar : - Control rack travel in mm : 7.6 While over checking ,if the cutting speed is above the rated speed and if, -the delivery values are within the overchecking tolerance -control rack remains at full load position even at 50 min (rpm) less than the rated speed the cutting-in speed should be declared OK. 8. DEGREE OF IRREGULARY Speed-min-1 (rpm) : 1090-1110 Boost pressure in bar : - Control rack travel in mm : 4.0 No of notches : 20.0 9. STARTING TRAVEL Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes 10.STARTING FUEL DELIVERY Speed-min-1 (rpm) : 100 Control rack travel in mm : 13.75-14.25 Delivery quantity(x ) : - in cm³/100 strokes
F002A0Z417 KOEL FUEL INJECTION PUMP TEST PLAN
Combination no. F 002 A0Z 417 Fuel-injection pump Engine 4R 1040 EJCB TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Inlet line 3.1 Calibrating oil inlet temp. °C 40.0 38.0 42.0 Overflow restrictor (type number) F 002 A10 627 Inlet press. bar 1.5 1.4 1.6 Test nozzle holder assembly 0 681 343 009 Opening pressure bar 173.5 172.0 175.0 Test pressure line 1 680 750 014 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 600 INJECTION PUMP SETTINGS START OF DELIVERY CAT Designation Unit Set value min. max. Actual values OT D Test pressure bar 26.0 25.0 27.0 D Rack travel mm 10.50 9.00 12.00 S Prestroke (as of BDC) mm 4.10 4.05 4.15 C Prestroke (as of BDC) mm 4.10 4.00 4.20 Cam sequence 1-3-4-2 Port-closing difference °NW 0-90-180-270 S Tolerance °NW 0.50 C Check tolerance °NW 0.75 Cylinder 1 °NW 0 Cylinder 3 °NW 90 15 165 Cylinder 4 °NW 180 105 255 Cylinder 2 °NW 270 195 345 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SETTING D speed rpm 1100 1100 D Rack travel mm 13.00 12.95 13.05 S Delivery cm3/1000S. 94.00 93.00 95.00 S Spread cm3/1000S. 3.00 D speed rpm 400 400 D Rack travel mm 8.70 8.60 8.80 S Delivery cm3/1000S. 15.00 13.00 17.00 S Spread cm3/1000S. 5.00 SETTINGS FOR INJECTION PUMP WITH GOVERNOR CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Page: 1 EP test values diesel fuel-injection equipment Page: 2 Customer ID No. KOEL Combination ID No. F002A0Z417 SLIDING SLEEVE TRAVEL/POSITION CAT Designation Unit Set value min. max. Actual values OT GUIDE SLEEVE POSITION D Control lever position ° - 3 - 3 D speed rpm 800 800 S Rack travel mm 0.50 0.30 0.70 D Governor spring pre-tension click setting x 4.00 4.00 FULL-LOAD DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1100 1100 D Aneroid pressure hPa 0 0 S Delivery cm3/1000S. 94.00 93.00 95.00 C Delivery cm3/1000S. 94.00 91.50 96.50 S Spread cm3/1000S. 3.00 C Spread cm3/1000S. 6.00 FULL-LOAD SPEED REGULATION/ASSEMBLY GOVERNOR CAT Designation Unit Set value min. max. Actual values OT D Control lever position ° 51.00 47.00 55.00 D Control lever position ° 101.00 97.00 105.00 FULL-LOAD SPEED REGULATION S Rack travel mm 12.00 S speed rpm 1155 1150.0 1160.0 D Rack travel mm 4.00 4.00 S speed rpm 1210 1200.0 1220.0 D Rack travel mm 0.85 0.30 1.40 S speed rpm 1350 D Rack travel mm 4.00 4.00 4.00 S speed rpm 1225 IDLE CAT Designation Unit Set value min. max. Actual values OT S Control lever position ° 70.00 66.00 74.00 S Control lever position ° 20.00 16.00 24.00 IDLE WITHOUT AUXILIARY SPRING D speed rpm 400 400 S Rack travel mm 8.20 8.10 8.30 D speed rpm 120 120 S CRT min. mm 19.00 C CRT min. mm 19.00 TESTING D speed rpm 400 400 S Rack travel mm 8.70 8.60 8.80 D Rack travel mm 2.00 2.00 S speed rpm 540 510.0 570.0 TORQUE CONTROL CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1100 1100 S Rack travel mm 13.00 12.95 13.05 C Rack travel mm 13.00 12.95 13.05 D speed rpm 500 500 S Rack travel mm 15.00 14.95 15.05 C Rack travel mm 15.00 14.95 15.05 D speed rpm 650 650 S Rack travel mm 14.80 14.70 14.90 C Rack travel mm 14.80 14.70 14.90 D speed rpm 1050 1050 S Rack travel mm 13.00 12.90 13.10 C Rack travel mm 13.00 12.90 13.10 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 3 Customer ID No. KOEL Combination ID No. F002A0Z417 FUEL DELIVERY CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 500 500 S Delivery cm3/1000S. 107.50 105.50 109.50 C Delivery cm3/1000S. 107.50 103.50 111.50 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 7.00 D speed rpm 650 650 S Delivery cm3/1000S. 114.50 112.50 116.50 C Delivery cm3/1000S. 114.50 110.50 118.50 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 7.00 IDLE DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 400 400 S Delivery cm3/1000S. 15.00 13.00 17.00 C Delivery cm3/1000S. 15.00 11.00 19.00 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 7.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
F002A0Z770 MAHINDRA FUEL PUMP TEST PLANS
Combination no. F 002 A0Z 770 Fuel-injection pump Pump designation PES3A85D320RS3500 EP type number F 002 A10 408 Governor Controller designation RSV325...900A1C1601R Controller type number F002A24225 Customer ident number M&M-FES-SWARAJ CUSTOMER DATA Customer ALLGEMEIN Engine RV3XM+ TremIIIA TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Inlet line 3.1 Calibrating oil inlet temp. °C 40.0 38.0 42.0 Overflow restrictor (type number) F 002 A10 627 Inlet press. bar 1.5 1.4 1.6 Test nozzle holder assembly 0 681 343 009 Opening pressure bar 173.5 172.0 175.0 Test pressure line 1 680 750 014 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 600 INJECTION PUMP SETTINGS START OF DELIVERY CAT Designation Unit Set value min. max. Actual values OT D Test pressure bar 26.0 25.0 27.0 D Rack travel mm 19.50 18.00 21.00 S Prestroke (as of BDC) mm 3.20 3.15 3.25 C Prestroke (as of BDC) mm 3.20 3.10 3.30 Cam sequence 1-3-2 Port-closing difference °NW 0-120-240 S Tolerance °NW 0.50 Cylinder 1 °NW 0 Cylinder 3 °NW 120 70 170 Cylinder 2 °NW 240 190 290 C Check tolerance °NW 0.75 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SETTING D speed rpm 900 900 D Rack travel mm 12.50 12.45 12.55 S Delivery cm3/1000S. 73.00 72.50 73.50 S Spread cm3/1000S. 2.50 C Spread cm3/1000S. 5.00 D speed rpm 325 325 D Rack travel mm 5.60 5.50 5.70 S Delivery cm3/1000S. 10.50 9.00 12.00 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 6.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 2 Customer ID No. M&M-FES-SWARAJ Combination ID No. F002A0Z770 SETTINGS FOR INJECTION PUMP WITH GOVERNOR SLIDING SLEEVE TRAVEL/POSITION CAT Designation Unit Set value min. max. Actual values OT GUIDE SLEEVE POSITION D Control lever position ° - 3 - 3 D speed rpm 800 800 S Rack travel mm 0.50 0.30 0.70 Governor spring pre-tension click setting x 2.50 FULL-LOAD DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 900 900 D Aneroid pressure hPa 0 0 S Delivery cm3/1000S. 73.00 72.50 73.50 C Delivery cm3/1000S. 73.00 70.50 75.50 S Spread cm3/1000S. 2.50 C Spread cm3/1000S. 5.00 FULL-LOAD SPEED REGULATION/ASSEMBLY GOVERNOR CAT Designation Unit Set value min. max. Actual values OT D Control lever position ° 92.00 88.00 96.00 FULL-LOAD SPEED REGULATION S Rack travel mm 11.50 S speed rpm 950 945.0 955.0 D Rack travel mm 4.00 4.00 S speed rpm 980 965.0 995.0 D Rack travel mm 0.85 0.30 1.40 S speed rpm 1150 D Rack travel mm 4.00 4.00 4.00 S speed rpm 985 IDLE CAT Designation Unit Set value min. max. Actual values OT S Control lever position ° 67.00 63.00 71.00 IDLE WITHOUT AUXILIARY SPRING D speed rpm 325 325 S Rack travel mm 5.10 5.05 5.15 D speed rpm 100 100 S CRT min. mm 19.00 C CRT min. mm 19.00 TESTING D speed rpm 325 325 S Rack travel mm 5.60 5.50 5.70 D Rack travel mm 2.00 2.00 S speed rpm 380 350.0 410.0 TORQUE CONTROL CAT Designation Unit Set value min. max. Actual values OT D speed rpm 900 900 S Rack travel mm 12.50 12.45 12.55 C Rack travel mm 12.50 12.45 12.55 D speed rpm 550 550 S Rack travel mm 12.80 12.70 12.90 C Rack travel mm 12.80 12.70 12.90 D speed rpm 800 800 S Rack travel mm 12.50 12.40 12.60 C Rack travel mm 12.50 12.40 12.60 D speed rpm 700 700 S Rack travel mm 12.70 12.60 12.80 C Rack travel mm 12.70 12.60 12.80 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 3 Customer ID No. M&M-FES-SWARAJ Combination ID No. F002A0Z770 FUEL DELIVERY CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 550 550 S Delivery cm3/1000S. 63.50 62.00 65.00 C Delivery cm3/1000S. 63.50 60.50 66.50 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 7.00 IDLE DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 325 325 S Delivery cm3/1000S. 10.50 9.00 12.00 C Delivery cm3/1000S. 10.50 7.00 14.00 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 6.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
F002A2ZA09-TEST PLAN
Combination No. : F 002 A2Z A09 Injection pump : PES 4 A 85 D 320 RS 2000 Governor : RSV 400...950 A 5 C 1592 R Customer : MAHINDRA Engine model : 415DI TREM IIIA Engine code : - Application : TRACTOR TEST BENCH REQUIREMENTS Test oil inlet temperature : 38°-42°C Overflow valve : F002A10627 Inlet pressure in bar : 1.5 Test injector : 0681343009 Opening pressure in bar : 172.0-175.0 High pressure pipe : 6X2X600 (ODXIDxlength) in mm (A) CALIBRATION OF PUMP WITHOUT GOVERNOR ACTION Direction of rotation : Clockwise Prestroke in mm : 3.65-3.75(3.6-3.8) Control rack position in mm : 9.0-12.0 Cam sequence : 1-3-4-2 Cam displacement : 0-90-180-270° ±0.5° Tappet clearance in mm : min 0.2 Injection Timing locking : - BASIC SETTING Speed-min-1 (rpm) : 950 Control rack travel in mm : 9.95-10.05 Delivery quantity(x ) : 4.9-5.2 in cm³/100 strokes Maximum spread in cm³ : 0.3(0.7) Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Delivery quantity(x ) : 0.7-1.1(0.5-1.3) in cm/100 strokes Maximum spread in cm³ : 0.5(0.7) (B) ADJUSTMENT OF PUMP AND GOVERNOR GUIDE SLEEVE TRAVEL Control lever position : Free Speed-min-1 (rpm) : 800 Control rack travel in mm : 0.3-0.7 1.MAXIMUM SPEED CONTROL (RATED SPEED) (without supplementry idling spring) Control lever position : 45.0±4.0° Speed-min-1 (rpm) : 500 Boost pressure in bar : - Control rack travel in mm : 11.0-11.2 Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 9.95-10.05 Speed-min-1 (rpm) : 990-1000 Boost pressure in bar : - Control rack travel in mm : 9.0 Speed-min-1 (rpm) : 1035-1065 Boost pressure in bar : - Control rack travel in mm : 4.0 Speed-min-1 (rpm) : 1200 Boost pressure in bar : - Control rack travel in mm : 0.3-1.4 2.FULL LOAD DELIVERY Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 9.95-10.05 Delivery quantity(x ) : 25.0-25.5(24.0-26.5) in cm³/500 strokes Maximum spread in cm³ : 1.5(3.5) 3.TORQUE CONTROL Speed-min-1 (rpm) : 500 Boost pressure in bar : - Control rack travel in mm : 11.0-11.2 Speed-min-1 (rpm) : 700 Boost pressure in bar : - Control rack travel in mm :11.0-11.2 Speed-min-1 (rpm) : 500 Boost pressure in bar : - Control rack travel in mm : 11.0-11.2 Speed-min-1 (rpm) : 700 Boost pressure in bar : - Control rack travel in mm : 11.0-11.2 Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 9.95-10.05 Contd...2 Provisional 4. COURSE OF DELIVERY Speed-min-1 (rpm) : 500 Boost pressure in bar : - Delivery quantity(x ) : 21.5-23.0(20.5-24.0) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : 700 Boost pressure in bar : - Delivery quantity(x ) : 25.25-26.75(24.25-27.75) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : 800 Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - 5. IDLING SPEED CONTROL (RATED SPEED) Control lever position : 23.0±4.0° Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Speed-min-1 (rpm) : 100 Control rack travel in mm : Minimum 19.0 Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Speed-min-1 (rpm) : 495-555 Control rack travel in mm : 2.0 6.MAXIMUM SPEED CONTROL (RATED SPEED) (with supplementary idling spring) Speed-min-1 (rpm) : - Control rack travel in mm : - 7. GOVERNOR CUTTING IN SPEED Speed-min-1 (rpm) : 990-1000 Boost pressure in bar : - Control rack travel in mm : 9.0 While over checking ,if the cutting speed is above the rated speed and if, -the delivery values are within the overchecking tolerance -control rack remains at full load position even at 50 min (rpm) less than the rated speed the cutting-in speed should be declared OK. 8. DEGREE OF IRREGULARY Speed-min-1 (rpm) : 1045-1075 Boost pressure in bar : - Control rack travel in mm : 4.0 No of notches : 16.0 9. STARTING TRAVEL Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes 10.STARTING FUEL DELIVERY Speed-min-1 (rpm) : 100 Control rack travel in mm : 16.0-16.5 Delivery quantity(x ) : - in cm³/100 strokes
F002A2ZA44 TEST PLAN
Fuel injection equipment for International Tractors ltd Customer : International Tractors ltd Application : Tractor:BS(TREM)IIIA Engine details Engine model : 3105NH Features : Aspiration: Naturally aspirated, cooling: Water cooled Power : 36.16kW(4805hp) @ 2000min-1 Bore x Stroke : Ø105 x 118mm Total Swept volume : 1021 cc/cyl Compression ratio : 18.5:1 Injection timing : 10± 2° BTDC High pressure pipe : OD: 6 mm ID: 1.8mm Length: 500 mm Details of fuel injection equipment Pump assembly : F002A2ZA44(E 040 3380 00) Pump : F002 A14 113 (PES 3A 85D 320 RS 2000) Governor : F002 A24 495 (RSV400…1000 A5C 1… R) Feed pump : F002 A500 040 FP/KSG 22AD 105 Injector : F002 C7Z 270 Nozzle holder : F002 C70 552 KBAL 90P 94 Nozzle : F002 C40 655 DSLA 148 P 1651 Sealing washer : 2430 105 009 Opening pressure : 250…258 (factory setting) 247…261(over checking) (using new NH/NH spring and for resetting) Allowable drop in opening pressure: 15% bar (should not be declared as defective when when referred under warranty) Filter : F002 H20 109(0.5l dual bowl filter) Pump F002 A14 113 has the following features: Pump housing F002 A10 805 Element : F002 B10 639 Delivery Valve : 9411 038 529 DV holder : 1413 372 090 Camshaft : F002 A11 137 Overflow valve : F002 A10 627 Governor F002 A24 495 is having the following features: Governor housing F002 A20 951 Governor cover : F002 A25 325 Flyweight assembly : 1428 194 031 Governor spring : 1424 650 060 Exclusive parts : pump spares : F002A2ZA44 Introduction: 07.02.2018 Refer to test chart : TSS_TS_ITL_F.A44
F002A4Z009-TEST PLAN
Test oil : F 002 S3E 001 Revision : 0 Combination No. : F 002 A4Z 009 Injection pump : PES 6 A 95 D 320 RS 4000 Governor : RSV 400...750 A 7 C 1784 R Customer : TATA Engine model : 6BTA Engine code : Application : GENSET-167HP TEST BENCH REQUIREMENTS Test oil inlet temperature : 38°-42°C Overflow valve : F002A10627 Inlet pressure in bar : 2.0 Test injector : 1688901101 Opening pressure in bar : 207.0-210.0 High pressure pipe : 6X2X600 (ODXIDxlength) in mm (A) CALIBRATION OF PUMP WITHOUT GOVERNOR ACTION Direction of rotation : Clockwise Prestroke in mm : 2.85-2.95(2.8-3.0) Control rack position in mm : 9.5-11.5 Cam sequence : 1- 5- 3- 6- 2- 4 Cam displacement : 0-60-120-180-240-300° ±0.5° Tappet clearance in mm : min 0.2 Injection Timing locking : 8.0 BASIC SETTING Speed-min-1 (rpm) : 730 Control rack travel in mm : 12.95-13.05 Delivery quantity(x ) : 17.35-17.65 in cm³/100 strokes Maximum spread in cm³ : 0.4(0.8) Speed-min-1 (rpm) : 400 Control rack travel in mm : 5.5-5.7 Delivery quantity(x ) : 1.3-1.7(1.05-1.95) in cm/100 strokes Maximum spread in cm³ : 0.6(0.9) (B) ADJUSTMENT OF PUMP AND GOVERNOR GUIDE SLEEVE TRAVEL Control lever position : Free Speed-min-1 (rpm) : 700 Control rack travel in mm : 0.3-0.7 1.MAXIMUM SPEED CONTROL (RATED SPEED) (without supplementry idling spring) Control lever position : 46.0±4.0° Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 730 Boost pressure in bar : - Control rack travel in mm : 12.95-13.05 Speed-min-1 (rpm) : 752-758 Boost pressure in bar : - Control rack travel in mm : 12.0 Speed-min-1 (rpm) : 790-800 Boost pressure in bar : - Control rack travel in mm : 4.0 Speed-min-1 (rpm) : 955 Boost pressure in bar : - Control rack travel in mm : 0.3-1.4 2.FULL LOAD DELIVERY Speed-min-1 (rpm) : 730 Boost pressure in bar : - Control rack travel in mm : 12.95-13.05 Delivery quantity(x ) : 87.35-87.65(86.0-89.0) in cm³/500 strokes Maximum spread in cm³ : 1.8(4.0) 3.TORQUE CONTROL Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm :- Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 730 Boost pressure in bar : - Control rack travel in mm : 12.95-13.05 Contd...2 Provisional 4. COURSE OF DELIVERY Speed-min-1 (rpm) : - Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - 5. IDLING SPEED CONTROL (RATED SPEED) Control lever position : 25.0±4.0° Speed-min-1 (rpm) : 400 Control rack travel in mm : 5.5-5.7 Speed-min-1 (rpm) : 100 Control rack travel in mm : Minimum 19.0 Speed-min-1 (rpm) : 400 Control rack travel in mm : 5.5-5.7 Speed-min-1 (rpm) : 450-510 Control rack travel in mm : 2.0 6.MAXIMUM SPEED CONTROL (RATED SPEED) (with supplementary idling spring) Speed-min-1 (rpm) : - Control rack travel in mm : - 7. GOVERNOR CUTTING IN SPEED Speed-min-1 (rpm) : 752-758 Boost pressure in bar : - Control rack travel in mm : 12.0 While over checking ,if the cutting speed is above the rated speed and if, -the delivery values are within the overchecking tolerance -control rack remains at full load position even at 50 min (rpm) less than the rated speed the cutting-in speed should be declared OK. 8. DEGREE OF IRREGULARY Speed-min-1 (rpm) : 795-815 Boost pressure in bar : - Control rack travel in mm : 4.0 No of notches : 18.0 9. STARTING TRAVEL Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes 10.STARTING FUEL DELIVERY Speed-min-1 (rpm) : 100 Control rack travel in mm : 15.25-16.75 Delivery quantity(x ) : 19.5-21.5(19.0-22.0) in cm³/100 strokes OTHER INFORMATION
F00VC30318,F 00V C30 318 MAGNETIC VALVE
MAGNETIC VALVE F00VC30318,F 00V C30 318 INJECTORS USED 0445110808,0445110807,0445110316,0445110922,0986435088,0445110159,0445110213,0445110243,0445110255,0445110256,0445110265,0445110183,0445110331,0445110578,0445B76583,0445110623,0445110585,0445110487,0445110950,0445110951,0445110944,0445110943,0445110942,0445110941,0445110936,0445110935,0445110936,0445110933,0445110932,0445110921,0445110891,0445110889,0445110888,0445110887,0445110885,0445110886,0445110868,0445110864,0445110860,0445110863,0445110859,0445110862,0445110861,0445110859,0445110863,0445110854,0445110853,0445110847,0445110846,0445110844,0445110843,0445110839,0445110836,0445110827,0445110826,0445110824,0445110825,0445110823,0445110821,0445110822,0445110817,0445110816,0445110812
FORCE TEMPO TRAVELLER 2.0 LT FUEL INJECTOR 28463904
Fuel injection Nozzle DLLA148S885, 0433271819, 04143813, 4143813, 0432291699, 05717016, 4143814, Bomag Deutz
Fuel Injection Pump 294050-0490, 294050-0491, 294050-0494 For HINO J08E, 22100-E0530, 22100-E0531, 22100-E0534
Fuel injection pump Adjusting Shim, HP5, 1J508-50501, 299000-0020, 22100-0e010, 22100-0e020, 31452143
FUEL INJECTION PUMP BOSCH 0460426396,0 460 426 396,0460426407,0 460 426 407 TATA CUMMINS LEFT HAND DRIVE BUS
Fuel Injection Pump Control Valve 0 928 400 691, 0928400691 Suitable for BMW X3 E81 E83 E88 E90 E91 E92
Fuel injection pump cummins 4928100, QSK19, F 00B C00 120, CR/CP9L2/R380/10-2378915S, High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, 2870938, 2 870 938 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, 2888712, 2 888 712 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, 4924585, 4 924 585 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, 4951894, 4 951 894 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, 4998820, 4 998 820 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, F00BC00016, F 00B C00 016 High pressure pump CP9 for cummins
Fuel injection pump cummins QSK19, CR/CP9L2/R380/10-2378915S, F00BC00051, F 00B C00 051 High pressure pump CP9 for cummins
FUEL INJECTION PUMP DEUTZ ENGINE 0414401105, 2112860, 2112860, 20500360 TCD2012L06 BF6M1013FC BF6M1013ECP BF6M1013EC BF6M1013 BF6M1013E
FUEL INJECTION PUMP ELEMENT DV PLUNGER 612630080234Y ZS576, P833, REPAIR KIT PS8500-T8, CAM SHAFT PS8500N
FUEL INJECTION PUMP GEAR PUMP COVER C9,C7,C-9,319-0678,319-0677,3190677,3190678
Fuel Injection Pump Nissan Micra, Renault Duster 28441809
FUEL INJECTION PUMP TEST PLANS 0460426428
Part no. 0 460 426 428 Pump designation VE6/12F1200R908-8 CUSTOMER DATA Customer Ashok-Leyland Engine HA 6 DTI 2 U Power 132.0 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Calibrating oil return temp. °C 55.0 54.0 56.0 Overflow restriction mm 0.75 Inlet press. bar 0.35 0.30 0.40 Test nozzle holder assembly 1 688 901 027 Opening pressure bar 250.0 247.0 253.0 Test pressure line 1 680 750 073 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 450.00 SETTINGS/TEST SPECIFICATONS ASSEMBLY AND ADJUSTMENT DIMENSIONS CAT Designation Unit Set value min. max. Actual values OT LDA/HBA stroke mm 5.0 Dimension K mm 3.70 3.60 3.80 Dimension KF mm 8.40 8.20 8.60 MS1 dimension mm 1.65 1.500 1.800 SVS dimension mm 0.8 0.600 1.000 Start of delivery blocking S Plunger stroke mm 1.30 1.280 1.320 S Outlet A SETTING CONTROL LEVER POSITION Control lever spacing YA mm 31.0 29.0 33.0 Control lever spacing YB mm 55.0 51.0 59.0 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SUPPLY PUMP PRESSURE D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 7.80 7.30 8.30 TIMING DEVICE TRAVEL D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.60 1.50 1.70 FULL-LOAD DELIVERY WITH BOOST PRESSURE D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 93.50 93.00 94.00 S Spread cm3/1000S. <=4.0 C Spread cm3/1000S. <=4.0 FULL-LOAD DELIV. WITHOUT BOOST PRESSURE D Temperature stabilization speed 1/min 2000 2000 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Customer ID No. Combination ID No. 0460426428 CAT Designation Unit Set value min. max. Actual values OT D Initial temperature °C 65 65 D speed rpm 450 450 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 58.50 58.00 59.00 IDLE CAT Designation Unit Set value min. max. Actual values OT IDLE SETTING D speed rpm 250 250 S Delivery cm3/1000S. 10.00 9.50 10.50 S Spread cm3/1000S. <=6.0 C Spread cm3/1000S. <=6.0 FULL-LOAD SPEED REGULATION CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 20.00 18.00 22.00 STARTING FUEL DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 100 100 S Delivery cm3/1000S. 130.00 105.00 155.00 START TRANSITION D speed rpm 250 250 S Delivery cm3/1000S. 59.00 53.00 65.00 INJECTION-PUMP TEST SPECIFICATIONS TIMING DEVICE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1150 1150 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 2.40 2.00 2.80 C Timing device travel mm 2.40 1.80 3.00 D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.60 1.50 1.70 C Timing device travel mm 1.60 1.10 2.10 D speed rpm 800 800 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 0.10 0.00 0.20 SUPPLY PUMP PRESSURE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 7.80 7.30 8.30 D speed rpm 500 500 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 5.80 5.10 6.50 OVERFLOW CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/10s. 166.66 133.33 200.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Customer ID No. Combination ID No. 0460426428 CAT Designation Unit Set value min. max. Actual values OT C Delivery cm3/10s. 166.66 125.00 208.33 S Delivery l/h 60.00 48.00 72.00 C Delivery l/h 60.00 45.00 75.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 500 500 D Measurement temperature °C 57 57 S Delivery cm3/10s. 138.88 116.68 161.08 C Delivery cm3/10s. 138.88 111.11 166.66 S Delivery l/h 50.00 42.00 58.00 C Delivery l/h 50.00 40.00 60.00 DELIVERY AND BREAKAWAY CURVE CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1350 1350 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 S Delivery cm3/1000S. 20.00 18.00 22.00 C Delivery cm3/1000S. 20.00 12.00 28.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 60 60 D speed rpm 800 800 D Measurement temperature °C 56 56 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.50 89.50 95.50 C Delivery cm3/1000S. 92.50 88.50 96.50 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 540 540 D Measurement temperature °C 57 57 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.00 89.00 95.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 93.50 93.00 94.00 C Delivery cm3/1000S. 93.50 90.00 97.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 450 450 D Measurement temperature °C 61 61 D Aneroid pressure hPa 325 325 S Delivery cm3/1000S. 83.00 82.50 83.50 C Delivery cm3/1000S. 83.00 79.00 87.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 450 450 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 58.50 58.00 59.00 C Delivery cm3/1000S. 58.50 55.00 62.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Customer ID No. Combination ID No. 0460426428 IDLE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 250 250 S Delivery cm3/1000S. 10.00 9.50 10.50 C Delivery cm3/1000S. 10.00 4.00 16.00 D speed rpm 310 310 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 SHUTOFF CAT Designation Unit Set value min. max. Actual values OT MECHANICAL SHUTOFF D speed rpm 1200 1200 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
Fuel injection pump Vane pump Cover, HP5, 1J508-50501, 299000-0020, 22100-0e010, 22100-0e020, 31452143
FUEL INJECTOR 0445110301
Fuel Injector 0445110310 MAHINDRA MAXIMO, SCORPIO 2.2 MHAWK
FUEL INJECTOR 0445110316 MARUTI SWIFT 0445110331, 0445110578, 0986435102
FUEL INJECTOR 0445110436 TATA ACE NOZZLE NO 0433172261 CR VALVE NO F00ZC01306
FUEL INJECTOR 0445110681
FUEL INJECTOR 0445110706 MARUTI SUZUKI SUPER CARRY
FUEL INJECTOR 0445110840 EICHER 4 CYL
FUEL INJECTOR 0445120140,0986435544 NOZZLE NO DLLA126P1776
Fuel injector 0445120142, DLLA149P1787 JAMZ ENGINE
Fuel injector 0445120144, DLLA128P1739 FOR CUMMINS
FUEL INJECTOR 0445120151,0445120211,DLLA143P1528 CUMMINS FUEL INJECTOR
FUEL INJECTOR 0445120160,DLLA150P1826 0445B29006 YUCHAI FUEL INJECTOR
FUEL INJECTOR 0445120161, 0445120204, 0445120267, 4988835 CUMMINS ISDE 6.7L/4.5L
FUEL INJECTOR 0445120167 MAHINDRA NAVISTAR
FUEL INJECTOR 0445120251 CUMMINS 5263314, 4945381, 5263262
FUEL INJECTOR 0445120371, 0445120382, T413609, 3969626, 396-9626 FOR PERKINS, CATERPILLAR
Fuel injector 0445120398, FKS00900, ASHOK LEYLAND
FUEL INJECTOR 0445120472 ASHOK LEYLAND 4 CYLINDER ENGINE / NEPTUNE TRUCK ASHOK LEYLAND
FUEL INJECTOR 23670-30450 TOYOTA FORTUNER EURO 5 ENGINE
Fuel injector Caterpillar 4W7018, PM565, PR1000, PR1000C, PR450, PR450C, PR750B, 836, 3208, 3406B, 3408
FUEL INJECTOR CUMMINS 0445120103, 0986435505, R5135790AD, 0445120114
FUEL INJECTOR CUMMINS 0445120253, 4988301, 5263313, 0445120159
FUEL INJECTOR FIESTA , FORD FIGO ASPIRE, FORD ECOSPORT FUEL INJECTOR 0445110489
Fuel Injector for Bosch Cummins Diesel Engine Common Rail Injector, 0445120008, 97208074, 2-90000-913-0, 2900009130
Fuel Injector For Hitachi ISUZU 6SD1 095000-0761, 1-15300415-1, 1153004151,095000-0760,095000761,095000760
Fuel Injector Mahindra Maximo 0445110751
FUEL INJECTOR REPAIR KIT for 0445110316 Injector F00ZC99558 , VALVE SET-F00VC01334 ,NOZZLE-0433171889
Fuel Injector Swaraj Mazda 0445110495
FUEL INJECTOR TEMPO TRAVELLER 0445110683
FUEL PUMP TEST PLAN 0460424087
FUEL PUMP TEST PLAN 0460426435
Part no. 0 460 426 435 Pump designation VE6/12F1200R908-10 CUSTOMER DATA Customer Ashok-Leyland Engine HA 6 DTI 2 N-BS2 Power 122.0 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO4113 Calibrating oil return temp. °C 55.0 54.0 56.0 Overflow restriction mm 0.75 Inlet press. bar 0.35 0.30 0.40 Test nozzle holder assembly 1 688 901 027 Opening pressure bar 250.0 247.0 253.0 Test pressure line 1 680 750 073 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 450.00 Shutoff solenoid V 24.0 Shutoff V 0 KSB solenoid valve V 24.0 SETTINGS/TEST SPECIFICATONS ASSEMBLY AND ADJUSTMENT DIMENSIONS CAT Designation Unit Set value min. max. Actual values OT Dimension K mm 3.70 3.60 3.80 Dimension KF mm KOT MS1 dimension mm 1.75 1.600 1.900 SVS dimension mm 0.3 0.300 0.300 Start of delivery blocking S Plunger stroke mm 1.3 1.280 1.320 S Outlet A SETTING CONTROL LEVER POSITION Control lever spacing YA mm 31.0 29.0 33.0 Control lever spacing YB mm 56.0 52.0 60.0 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SUPPLY PUMP PRESSURE D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 6.30 5.80 6.80 TIMING DEVICE TRAVEL D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.80 1.70 1.90 FULL-LOAD DELIVERY WITH BOOST PRESSURE D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.00 91.50 92.50 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 4.00 FULL-LOAD DELIV. WITHOUT BOOST PRESSURE CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Page: 1 EP test values diesel fuel-injection equipment Page: 2 Customer ID No. Combination ID No. 0460426435 CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 350 350 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 48.00 47.50 48.50 IDLE CAT Designation Unit Set value min. max. Actual values OT IDLE SETTING D speed rpm 270 270 S Delivery cm3/1000S. 9.00 8.50 9.50 S Spread cm3/1000S. 6.00 FULL-LOAD SPEED REGULATION CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 25.00 23.00 27.00 STARTING FUEL DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 100 100 S Delivery cm3/1000S. 130.00 105.00 155.00 START TRANSITION D speed rpm 250 250 S Delivery cm3/1000S. 49.00 43.00 55.00 COLD-START ACCELERATOR KSB CAT Designation Unit Set value min. max. Actual values OT D speed rpm 550 550 S Timing device travel mm 2.40 1.90 2.90 KSB/AFB V 24 INJECTION-PUMP TEST SPECIFICATIONS TIMING DEVICE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1150 1150 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 2.40 2.10 2.70 C Timing device travel mm 2.40 1.80 3.00 D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 1.80 1.70 1.90 C Timing device travel mm 1.80 1.30 2.30 D speed rpm 800 800 D Aneroid pressure hPa 1000 1000 S Timing device travel mm 0.10 0.00 0.20 SUPPLY PUMP PRESSURE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1000 1000 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 6.30 5.80 6.80 D speed rpm 500 500 D Aneroid pressure hPa 1000 1000 S Supply pump pressure bar 3.60 2.90 4.30 D speed rpm 550 550 S Supply pump pressure bar 7.60 6.80 8.40 S KSB/AFB V 24 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) EP test values diesel fuel-injection equipment Page: 3 Customer ID No. Combination ID No. 0460426435 OVERFLOW CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/10s. 166.66 133.33 200.00 C Delivery cm3/10s. 166.66 125.00 208.33 S Delivery l/h 60.00 48.00 72.00 C Delivery l/h 60.00 45.00 75.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 500 500 D Measurement temperature °C 57 57 S Delivery cm3/10s. 111.11 111.11 111.11 C Delivery cm3/10s. 111.11 83.33 138.88 S Delivery l/h 40.00 40.00 40.00 C Delivery l/h 40.00 30.00 50.00 DELIVERY AND BREAKAWAY CURVE CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1375 1375 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1325 1325 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 S Delivery cm3/1000S. 25.00 23.00 27.00 C Delivery cm3/1000S. 25.00 17.00 33.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 750 750 D Measurement temperature °C 57 57 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 97.50 94.00 101.00 C Delivery cm3/1000S. 97.50 93.00 102.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 540 540 D Measurement temperature °C 57 57 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 88.50 85.00 92.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1200 1200 D Measurement temperature °C 55 55 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 92.00 91.50 92.50 C Delivery cm3/1000S. 92.00 88.50 95.50 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 600 600 D Measurement temperature °C 57 57 D Aneroid pressure hPa 150 150 S Delivery cm3/1000S. 78.00 77.50 78.50 C Delivery cm3/1000S. 78.00 74.00 82.00 D Temperature stabilization speed 1/min 2000 2000 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) BOSCH EP test values diesel fuel-injection equipment Page: 4 Customer ID No. Combination ID No. 0460426435 CAT Designation Unit Set value min. max. Actual values OT D Initial temperature °C 65 65 D speed rpm 350 350 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 48.00 47.50 48.50 C Delivery cm3/1000S. 48.00 44.50 51.50 IDLE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 270 270 S Delivery cm3/1000S. 9.00 8.50 9.50 C Delivery cm3/1000S. 9.00 3.00 15.00 D speed rpm 325 325 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 SHUTOFF CAT Designation Unit Set value min. max. Actual values OT MECHANICAL SHUTOFF D speed rpm 1200 1200 D Aneroid pressure hPa 1000 1000 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 ELECTR. SHUTOFF, CONTROL LEVER FULL LOAD D speed rpm 270 270 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
Fuel Transfer Pump 326-1006, 3261006 Suitable for Caterpillar C9, C7, 3126E, D6R, D7R, 329DL, 336D, 330DL
Genuine common rail pump 294050-0138 , 294050-0131 , 294050-0139 , 294050-0137 HINO J08E 22100-E0025 KOBELCO 350 FUEL INJECTION PUMP 294050-0130
INJECTOR 0445110496 MAHINDRA MAXIMO PLUS
INJECTOR 0445110519 FOR BHARAT BENZ CR VALVE NO F00ZC01314, NOZZLE NO DLLA144P2341
INJECTOR 0445120101 ASHOK LEYLAND
INJECTOR 0445120133,4993482,4945463 CUMMINS
INJECTOR 0445120233, B9802001 FOR ASHOK LEYLAND, CUMMINS 4 CYLINDER ENGINE
INJECTOR 0445120329 FOR TATA TRUCK NEW MODEL
INJECTOR 0445120421,0445b44069 MAHINDRA NAVISTAR
ISUZU MOTORS INDIA PVT LTD, 104329020606, 8974450740, 2.5 LITRE 4 Cylinder Common Rail -G.Exp. 4JA1 Eng
Komatsu Diesel Fuel Injection Pump DV 090140-2020, 2020, 6151-72-1181, 092000-12116, 6d125 Fuel Injection pump
Komatsu Diesel Fuel Injection Pump Element Plunger 090150-6200, 6200, 6151-72-1181, 092000-12116, 6d125 Fuel Injection pump
Komatsu Diesel Fuel Injection Pump Nozzle 093400-3020, DLLA150SND302, 6151-72-1181, 092000-12116, 6d125 Fuel Injection pump
Komatsu Diesel Fuel Injection Pump repair kit 190440-0390, 6151-72-1181, 092000-12116, 6d125 Fuel Injection pump
KOMATSU MACHINE WITH CUMMINS QSK ENGINE FUEL INJECTOR Y431K05394, Y 431K05 394,2867149
LIUGONG LOADER COMMON RAIL PRESSSURE SWITCH – NEW GENERATION BS6
Mahindra Bolero Fuel Injection Pump F002FC0004, 0305BAU00421N, 0350BAB02361N, Mahindra 2.5lt diesel bolero, Kuv100, TUV 300
MAHINDRA UPCR INJECTOR 28535488 2.5L-SCORPIO, BOLERO, LCV TOURISTER
Mahindra VE pump 0 460 414 240, 0460414240, 0305HC0071N, Bolero Camper 2.5 Diesel, Mahindra Scorpio 2.5TD
Mahindra XUV Common Rail Fuel Injection Pump CP1H3, 0445010176, 0 445 010 176 For 2.2L Mhawk and 2.5L Engine
Man Common Rail Fuel Injector 0445120044, 0 445 120 044, 51.10100.6049, 51101006049
Man Fuel Injection Pump 0470506009, 51111037590, 51111037560, 51111037732, 64111037803, 51111037645, 51111037726, 51111006034, VP44
Map Sensor 0 281 002 576, 0281002576 Suitable for Cummins Kamaz Volvo Ford Renault Excavator Spare Part
MERCEDES 2.2 FUEL INJECTOR DELPHI COMMON RAIL INJECTOR 28342997,651 070 0587, R00002D,A6510700587,A6510704987
Oil seal suitable for TATA Nexon, TATA INTRA Fuel injection pump 28637208, 572407100105 TATA Nexon 1.5
Original new QSX15 Nozzle For Cummins ISX ISX15 QSX15 Injector 4088660, 4088327, 4088662, 4088665, 4902824…
Radial Oil Seal CB28, F 029 D01 165, F029D01165 oil seal suitable or CB28 fuel pump 0445020608, 0445020617, 0445020618, 0445020610
Rail Pressure DRV, Pressure Control Valve 0281006254 For Audi A4 A5 A6 A8 Q7 For VW 3.0 4.2 4.0 TDI
Rail Pressure Sensor Switch 55pp26-02, 03L906051, 03L 906 051, 057130764H
RENAULT DUSTER FUEL INJECTION PUMP A2C59513595, 5WS40565, 8200702621, 8200704200, 167000938R, A2C59513494 CONTINENTAL
Tappet suitable for CB28 fuel injection pump 0445025608, 0 445 025 608, 0445025663, 0445025610, 0445025616, 0445025618 F 019 D04 000, F019D04000, 278607990155
TATA CUMMINS FUEL INJECTOR 0445120369, 5295060, 278607990157
Temperature Sensor 256-6453, 2566453, for Cat Caterpillar 3406E, 3516B, C18, C15, C13, C11, E324D, E329D, E330D, E345C, E345D, 416F, 420F, 428F, 430F, 432
TEST PLAN F 002 A0Z 728, F002A0Z728
REFERENCE NO : TSS-TS-MML F..728 Edition : 01.2012 Replaces(edition) : 10.2010 Test oil : F 002 S3E 001 Revision : 6 Combination No. : F 002 A0Z 728-E040.229.200 Injection pump : PES 4 A 85 D 320 RS 2000 Governor : RSV 400...950 A 5 C 1592 R Customer : Mahindra & Mahindra Ltd. Engine model : MDI 2385 N 3A Engine code : - Application : TRACTOR-475DI TEST BENCH REQUIREMENTS Test oil inlet temperature : 38°-42°C Overflow valve : F002A10627 Inlet pressure in bar : 1.5 Test injector : 0681343009 Opening pressure in bar : 172.0-175.0 High pressure pipe : 6X2X600 (ODXIDxlength) in mm (A) CALIBRATION OF PUMP WITHOUT GOVERNOR ACTION Direction of rotation : Clockwise Prestroke in mm : 3.65-3.75(3.6-3.8) Control rack position in mm : 9.0-12.0 Cam sequence : 1-3-4-2 Cam displacement : 0-90-180-270° ±0.5° Tappet clearance in mm : min 0.2 Injection Timing locking : - BASIC SETTING Speed-min-1 (rpm) : 950 Control rack travel in mm : 10.35-10.45 Delivery quantity(x ) : 5.3-5.6 in cm³/100 strokes Maximum spread in cm³ : 0.3(0.7) Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Delivery quantity(x ) : 0.7-1.1(0.5-1.3) in cm/100 strokes Maximum spread in cm³ : 0.5(0.7) (B) ADJUSTMENT OF PUMP AND GOVERNOR GUIDE SLEEVE TRAVEL Control lever position : Free Speed-min-1 (rpm) : 800 Control rack travel in mm : 0.3-0.7 1.MAXIMUM SPEED CONTROL (RATED SPEED) (without supplementry idling spring) Control lever position : 45.0±4.0° Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 10.35-10.45 Speed-min-1 (rpm) : 990-1000 Boost pressure in bar : - Control rack travel in mm : 9.4 Speed-min-1 (rpm) : 1040-1070 Boost pressure in bar : - Control rack travel in mm : 4.0 Speed-min-1 (rpm) : 1225 Boost pressure in bar : - Control rack travel in mm : 0.3-1.4 2.FULL LOAD DELIVERY Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 10.35-10.45 Delivery quantity(x ) : 27.0-27.5(26.0-28.5) in cm³/500 strokes Maximum spread in cm³ : 1.5(3.5) 3.TORQUE CONTROL Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm :- Speed-min-1 (rpm) : 500 Boost pressure in bar : - Control rack travel in mm : 11.4-11.6 Speed-min-1 (rpm) : 700 Boost pressure in bar : - Control rack travel in mm : 11.4-11.6 Speed-min-1 (rpm) : - Boost pressure in bar : - Control rack travel in mm : - Speed-min-1 (rpm) : 950 Boost pressure in bar : - Control rack travel in mm : 10.35-10.45 Contd...2 TSS-TS-MML F..728 4. COURSE OF DELIVERY Speed-min-1 (rpm) : 500 Boost pressure in bar : - Delivery quantity(x ) : 22.25-23.75(21.25-24.75) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : 700 Boost pressure in bar : - Delivery quantity(x ) : 26.75-28.25(25.75-29.25) in cm³/500 strokes Maximum spread in cm³ : 2.0(4.0) Speed-min-1 (rpm) : - Boost pressure in bar : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes Maximum spread in cm³ : - 5. IDLING SPEED CONTROL (RATED SPEED) Control lever position : 23.0±4.0° Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Speed-min-1 (rpm) : 100 Control rack travel in mm : Minimum 19.0 Speed-min-1 (rpm) : 400 Control rack travel in mm : 6.9-7.1 Speed-min-1 (rpm) : 490-550 Control rack travel in mm : 2.0 6.MAXIMUM SPEED CONTROL (RATED SPEED) (with supplementary idling spring) Speed-min-1 (rpm) : - Control rack travel in mm : - 7. GOVERNOR CUTTING IN SPEED Speed-min-1 (rpm) : 990-1000 Boost pressure in bar : - Control rack travel in mm : 9.4 While over checking ,if the cutting speed is above the rated speed and if, -the delivery values are within the overchecking tolerance -control rack remains at full load position even at 50 min (rpm) less than the rated speed the cutting-in speed should be declared OK. 8. DEGREE OF IRREGULARY Speed-min-1 (rpm) : 1055-1085 Boost pressure in bar : - Control rack travel in mm : 4.0 No of notches : 16.0 9. STARTING TRAVEL Speed-min-1 (rpm) : - Control rack travel in mm : - Delivery quantity(x ) : - in cm³/500 strokes 10.STARTING FUEL DELIVERY Speed-min-1 (rpm) : 100 Control rack travel in mm : 16.0-16.5 Delivery quantity(x ) : - in cm³/100 strokes
TEST PLAN F 002 A3Z F07, F002A3ZF07
Combination No. : F 002 A3Z F07
Injection pump : PES 3 A 90 D 410 RS 3500
Governor : RSV 375...1100 A 4 C 1799 L
Customer : Escorts Ltd.
Engine model : E3.276 BT3A
Engine code : -
Application : Tractor-49.5HP
TEST BENCH REQUIREMENTS
Test oil inlet temperature : 38°-42°C
Overflow valve : 1417413012
Inlet pressure in bar : 1.5
Test injector : 0681343009
Opening pressure in bar : 172.0-175.0
High pressure pipe : 6X2X600
(ODXIDxlength) in mm
(A) CALIBRATION OF PUMP WITHOUT GOVERNOR ACTION
Direction of rotation : Clockwise
Prestroke in mm : 4.15-4.25(4.1-4.3)
Control rack position in mm : 18.0-21.0
Cam sequence : 1- 2 - 3
Cam displacement : 0-120-240° ±0.5°
Tappet clearance in mm : min 0.2
Injection Timing locking : -
BASIC SETTING
Speed-min-1 (rpm) : 1100
Control rack travel in mm : 13.45-13.55
Delivery quantity(x ) : 8.25-8.55
in cm³/100 strokes
Maximum spread in cm³ : 0.3(0.7)
Speed-min-1 (rpm) : 375
Control rack travel in mm : 8.4-8.6
Delivery quantity(x ) : 1.4-1.8(1.2-2.0)
in cm/100 strokes
Maximum spread in cm³ : 0.5(0.7)
(B) ADJUSTMENT OF PUMP AND GOVERNOR
GUIDE SLEEVE TRAVEL
Control lever position : Free
Speed-min-1 (rpm) : 800
Control rack travel in mm : 0.3-0.7
1.MAXIMUM SPEED CONTROL (RATED SPEED)
(without supplementry idling spring)
Control lever position : 68.0±4.0°
Speed-min-1 (rpm) : 500
Boost pressure in bar : -
Control rack travel in mm : 14.7-14.9
Speed-min-1 (rpm) : 1100
Boost pressure in bar : -
Control rack travel in mm : 13.45-13.55
Speed-min-1 (rpm) : 1140-1150
Boost pressure in bar : -
Control rack travel in mm : 12.5
Speed-min-1 (rpm) : 1180-1210
Boost pressure in bar : -
Control rack travel in mm : 4.0
Speed-min-1 (rpm) : 1300
Boost pressure in bar : -
Control rack travel in mm : 0.3-1.3
2.FULL LOAD DELIVERY
Speed-min-1 (rpm) : 1100
Boost pressure in bar : -
Control rack travel in mm : 13.45-13.55
Delivery quantity(x ) : 41.85-42.15(40.75-43.25)
in cm³/500 strokes
Maximum spread in cm³ : 1.5(3.5)
3.TORQUE CONTROL
Speed-min-1 (rpm) : 500
Boost pressure in bar : -
Control rack travel in mm : 14.7-14.9
Speed-min-1 (rpm) : 700
Boost pressure in bar : -
Control rack travel in mm :14.7-14.9
Speed-min-1 (rpm) : 500
Boost pressure in bar : -
Control rack travel in mm : 14.7-14.9
Speed-min-1 (rpm) : 700
Boost pressure in bar : -
Control rack travel in mm : 14.7-14.9
Speed-min-1 (rpm) : -
Boost pressure in bar : -
Control rack travel in mm : -
Speed-min-1 (rpm) : 1100
Boost pressure in bar : -
Control rack travel in mm : 13.45-13.55
Contd...2
TSS-TS-ESC-F..A3ZF07
4. COURSE OF DELIVERY
Speed-min-1 (rpm) : 500
Boost pressure in bar : -
Delivery quantity(x ) : -
in cm³/500 strokes
Maximum spread in cm³ : -
Speed-min-1 (rpm) : 700
Boost pressure in bar : -
Delivery quantity(x ) : 46.0-47.5(45.0-48.5)
in cm³/500 strokes
Maximum spread in cm³ : -
Speed-min-1 (rpm) : 900
Boost pressure in bar : -
Delivery quantity(x ) : -
in cm³/500 strokes
Maximum spread in cm³ : -
Speed-min-1 (rpm) : -
Control rack travel in mm : -
Delivery quantity(x ) : -
in cm³/500 strokes
Maximum spread in cm³ : -
5. IDLING SPEED CONTROL (RATED SPEED)
Control lever position : 27.0±4.0°
Speed-min-1 (rpm) : 375
Control rack travel in mm : 8.4-8.6
Speed-min-1 (rpm) : 100
Control rack travel in mm : Minimum 19.0
Speed-min-1 (rpm) : 375
Control rack travel in mm : 8.4-8.6
Speed-min-1 (rpm) : 460-520
Control rack travel in mm : 2.0
6.MAXIMUM SPEED CONTROL (RATED SPEED)
(with supplementary idling spring)
Speed-min-1 (rpm) : -
Control rack travel in mm : -
7. GOVERNOR CUTTING IN SPEED
Speed-min-1 (rpm) : 1140-1150
Boost pressure in bar : -
Control rack travel in mm : 12.5
While over checking ,if the cutting speed is above the rated speed and if,
-the delivery values are within the overchecking tolerance
-control rack remains at full load position even at 50 min
(rpm) less than the rated speed
the cutting-in speed should be declared OK.
8. DEGREE OF IRREGULARY
Speed-min-1 (rpm) : 1185-1215
Boost pressure in bar : -
Control rack travel in mm : 4.0
No of notches : 18.0
9. STARTING TRAVEL
Speed-min-1 (rpm) : -
Control rack travel in mm : -
Delivery quantity(x ) : -
in cm³/500 strokes
10.STARTING FUEL DELIVERY
Speed-min-1 (rpm) : -
Control rack travel in mm : -
Delivery quantity(x ) : -
in cm³/100 strokes
TEST PLAN F002A0Z455 FOR GEUINE PARTS BUY FROM TURBO TECH ENGINEERS
Combination no. F 002 A0Z 455 Fuel-injection pump Pump designation PES6A100D320RS3520 EP type number F 002 A10 051 Governor Controller designation RSV300...1300A5C1414R Controller type number F002A24041 Customer ident number AL-Ennore CUSTOMER DATA Customer ASHOK-LEYLAND Engine AL 412 TC AC Power 111.0 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Inlet line 1.1 Calibrating oil inlet temp. °C 40.0 38.0 42.0 Overflow restrictor (type number) 1 457 413 010 Inlet press. bar 1.5 1.4 1.6 Test nozzle holder assembly 0 681 343 009 Opening pressure bar 173.5 172.0 175.0 Test pressure line 1 680 750 014 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 600 INJECTION PUMP SETTINGS START OF DELIVERY CAT Designation Unit Set value min. max. Actual values OT D Test pressure bar 26.0 25.0 27.0 D Rack travel mm 10.50 9.00 12.00 S Prestroke (as of BDC) mm 3.70 3.65 3.75 C Prestroke (as of BDC) mm 3.70 3.60 3.80 Cam sequence 1-5-3-6-2-4 Port-closing difference °NW 0-60-120-180 240-300 S Tolerance °NW 0.50 Cylinder 1 °NW 0 Cylinder 5 °NW 60 10 110 Cylinder 3 °NW 120 70 170 Cylinder 6 °NW 180 130 230 Cylinder 2 °NW 240 190 290 Cylinder 4 °NW 300 250 350 C Check tolerance °NW 0.75 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SETTING D speed rpm 800 800 D Rack travel mm 11.50 11.45 11.55 S Delivery cm3/1000S. 84.00 83.00 85.00 S Spread cm3/1000S. 3.50 C Spread cm3/1000S. 6.00 D speed rpm 300 300 D Rack travel mm 6.40 6.30 6.50 S Delivery cm3/1000S. 8.00 6.00 10.00 S Spread cm3/1000S. 4.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Combination ID No. F002A0Z455 CAT Designation Unit Set value min. max. Actual values OT C Spread cm3/1000S. 6.00 SETTINGS FOR INJECTION PUMP WITH GOVERNOR SLIDING SLEEVE TRAVEL/POSITION CAT Designation Unit Set value min. max. Actual values OT GUIDE SLEEVE POSITION D Control lever position ° - 3 - 3 D speed rpm 800 800 S Rack travel mm 0.50 0.30 0.70 Governor spring pre-tension click setting x 3.00 FULL-LOAD DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 800 800 D Aneroid pressure hPa 190 190 S Delivery cm3/1000S. 84.00 83.00 85.00 C Delivery cm3/1000S. 84.00 81.00 87.00 S Spread cm3/1000S. 3.50 C Spread cm3/1000S. 6.00 FULL-LOAD SPEED REGULATION/ASSEMBLY GOVERNOR CAT Designation Unit Set value min. max. Actual values OT D Control lever position ° 107.00 103.00 111.00 FULL-LOAD SPEED REGULATION S Rack travel mm 10.50 S speed rpm 1425 1420.0 1430.0 D Rack travel mm 4.00 4.00 S speed rpm 1470 1455.0 1485.0 D Rack travel mm 0.85 0.30 1.40 S speed rpm 1650 D Rack travel mm 4.00 4.00 4.00 S speed rpm 1505 IDLE CAT Designation Unit Set value min. max. Actual values OT S Control lever position ° 67.00 63.00 71.00 IDLE WITHOUT AUXILIARY SPRING D speed rpm 300 300 S Rack travel mm 5.90 5.85 5.95 D speed rpm 100 100 S CRT min. mm 10.30 C CRT min. mm 10.30 TESTING D speed rpm 300 300 S Rack travel mm 6.40 6.30 6.50 D Rack travel mm 2.00 2.00 S speed rpm 570 540.0 600.0 TORQUE CONTROL CAT Designation Unit Set value min. max. Actual values OT D speed rpm 800 800 S Rack travel mm 11.50 11.45 11.55 C Rack travel mm 11.50 11.45 11.55 D speed rpm 1300 1300 S Rack travel mm 11.50 11.40 11.60 C Rack travel mm 11.50 11.40 11.60 D speed rpm 500 500 S Rack travel mm 10.40 10.30 10.50 C Rack travel mm 10.40 10.30 10.50 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Combination ID No. F002A0Z455 BOOST-PRESSURE DEPENDENT FULL-LOAD STOPT CAT Designation Unit Set value min. max. Actual values OT SETTING D speed rpm 500 500 D Pressure hPa 190 190 S Rack travel mm 11.50 11.40 11.60 D speed rpm 500 500 D Pressure hPa 0 0 S Rack travel mm 10.40 10.30 10.50 TESTING D speed rpm 500 500 D Pressure hPa 125 125 S Rack travel mm 11.00 10.90 11.10 D speed rpm 500 500 D Pressure hPa 150 150 S Rack travel mm 11.15 11.05 11.25 FUEL DELIVERY CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 500 500 S Delivery cm3/1000S. 51.50 49.50 53.50 C Delivery cm3/1000S. 51.50 47.50 55.50 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 7.00 D Aneroid pressure hPa 190 190 D speed rpm 1300 1300 S Delivery cm3/1000S. 90.00 88.00 92.00 C Delivery cm3/1000S. 90.00 86.00 94.00 S Spread cm3/1000S. 5.00 C Spread cm3/1000S. 7.00 STARTING FUEL DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 100 100 D Rack travel mm 10.30 10.30 10.30 S Delivery cm3/1000S. 0.00 -7.50 7.50 C Delivery cm3/1000S. 0.00 -10.00 10.00 IDLE DELIVERY CAT Designation Unit Set value min. max. Actual values OT D speed rpm 300 300 S Delivery cm3/1000S. 8.00 6.00 10.00 C Delivery cm3/1000S. 8.00 4.00 12.00 S Spread cm3/1000S. 4.00 C Spread cm3/1000S. 6.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
VE FUEL PUMP TEST BENCH 0460423079 TEST PLAN
Part no. 0 460 423 079 Pump designation VE3/12F1150L1186 CUSTOMER DATA Customer CNH Engine S8000 series, 55 HP Power 40.7 kW TEST PREREQUISITES CAT Designation Unit Set value min. max. Actual values OT Test oil ISO 4113 Calibrating oil return temp. °C 55.0 54.0 56.0 Overflow restriction mm 0.75 Inlet press. bar 0.35 0.30 0.40 Test nozzle holder assembly 1 688 901 027 Opening pressure bar 250.0 247.0 253.0 Test pressure line 1 680 750 073 Outside diameter mm 6.0 x Inside diameter mm 2.0 x Length mm 450.00 Shutoff solenoid V 12 Shutoff V 0 SETTINGS/TEST SPECIFICATONS ASSEMBLY AND ADJUSTMENT DIMENSIONS CAT Designation Unit Set value min. max. Actual values OT Dimension K mm 3.7 3.600 3.800 Dimension KF mm 8.8 8.600 9.000 MS1 dimension mm 0.80 0.650 0.950 SVS dimension mm 0.80 0.600 1.000 TLA travel mm 8.7 8.600 8.800 Start of delivery blocking S Plunger stroke mm 0.45 0.430 0.470 S Outlet A SETTING CONTROL LEVER POSITION Control lever spacing YA mm 34.0 32.0 36.0 Control lever spacing YB mm 46.0 43.0 49.0 BASIC SETTING CAT Designation Unit Set value min. max. Actual values OT SUPPLY PUMP PRESSURE D speed rpm 900 900 S Supply pump pressure bar 8.10 7.40 8.80 TIMING DEVICE TRAVEL D speed rpm 900 900 S Timing device travel mm 1.60 1.40 1.80 FULL-LOAD DELIVERY D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 60 60 D speed rpm 1150 1150 D Measurement temperature °C 56 56 S Delivery cm3/1000S. 84.50 84.00 85.00 S Spread cm3/1000S. <=5.5 C Spread cm3/1000S. <=5.5 IDLE CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) Page: 1 BOSCH EP test values diesel fuel-injection equipment Page: 2 Customer ID No. Combination ID No. 0460423079 CAT Designation Unit Set value min. max. Actual values OT IDLE SETTING D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 300 300 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 10.00 9.00 11.00 S Spread cm3/1000S. <=7.0 C Spread cm3/1000S. <=7.0 FULL-LOAD SPEED REGULATION CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1300 1300 D Measurement temperature °C 55 55 S Delivery cm3/1000S. 24.00 22.00 26.00 STARTING FUEL DELIVERY CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 100 100 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 79.00 54.00 104.00 START TRANSITION D Initial temperature °C 65 65 D speed rpm 300 300 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 99.00 93.00 105.00 INJECTION-PUMP TEST SPECIFICATIONS TIMING DEVICE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 1150 1150 S Timing device travel mm 2.50 2.00 3.00 C Timing device travel mm 2.50 2.00 3.00 D speed rpm 900 900 S Timing device travel mm 1.60 1.40 1.80 C Timing device travel mm 1.60 1.00 2.20 D speed rpm 830 830 S Timing device travel mm 0.80 0.40 1.20 C Timing device travel mm 0.80 0.10 1.50 SUPPLY PUMP PRESSURE CURVE CAT Designation Unit Set value min. max. Actual values OT D speed rpm 900 900 S Supply pump pressure bar 8.10 7.40 8.80 D speed rpm 500 500 S Supply pump pressure bar 5.50 4.80 6.20 OVERFLOW CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 60 60 D speed rpm 1150 1150 D Measurement temperature °C 56 56 S Delivery l/h 65.00 55.00 75.00 S Delivery cm3/10s. 180.55 152.77 208.33 C Delivery l/h 65.00 53.00 77.00 C Delivery cm3/10s. 180.55 147.22 213.88 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set) BOSCH EP test values diesel fuel-injection equipment Page: 3 Customer ID No. Combination ID No. 0460423079 DELIVERY AND BREAKAWAY CURVE CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1360 1360 D Measurement temperature °C 55 55 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 D Temperature stabilization speed 1/min 100 100 D Initial temperature °C 53 53 D speed rpm 1300 1300 D Measurement temperature °C 55 55 S Delivery cm3/1000S. 24.00 22.00 26.00 C Delivery cm3/1000S. 24.00 18.00 30.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 61 61 D speed rpm 700 700 D Measurement temperature °C 57 57 S Delivery cm3/1000S. 86.50 83.50 89.50 C Delivery cm3/1000S. 86.50 83.50 89.50 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 60 60 D speed rpm 1150 1150 D Measurement temperature °C 56 56 S Delivery cm3/1000S. 84.50 84.00 85.00 C Delivery cm3/1000S. 84.50 82.00 87.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 60 60 D speed rpm 900 900 D Measurement temperature °C 56 56 S Delivery cm3/1000S. 83.00 80.00 86.00 IDLE CAT Designation Unit Set value min. max. Actual values OT D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 300 300 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 10.00 9.00 11.00 C Delivery cm3/1000S. 10.00 4.00 16.00 D Temperature stabilization speed 1/min 2000 2000 D Initial temperature °C 65 65 D speed rpm 410 410 D Measurement temperature °C 61 61 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 SHUTOFF CAT Designation Unit Set value min. max. Actual values OT ELECTR. SHUTOFF, CONTROL LEVER IDLE D speed rpm 300 300 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 ELECTR. SHUTOFF, CONTROL LEVER FULL LOAD D speed rpm 300 300 S Delivery cm3/1000S. 1.50 0.00 3.00 C Delivery cm3/1000S. 1.50 0.00 3.00 CAT = Category (D = Default, S = Setting value, C = Check value) OT = Outside Tolerance (X is set)
VENTO FUEL INJECTION PUMP VCV A2C5329064080
Volvo Fuel Injection pump 0414401106, 0 414 401 106, PFM1P100S1010, 02113002, 2113002, 211 3002, 24425954, VOLVO 140
VOLVO FUEL INJECTOR 0445120066, 04290986, 0986435548, 4290986, 4289311, 20798114
Volvo Unit Injector 3835257,38-352-57 suitable for TAD1240GE, TAD1241GE, TAD1242GE, 0414702015, 0414702024
Bosch Injector 0445110653, 0445111019, 0445110654, 024J813375, LR073710, G4D3 9K546 AA, G4D3-9K546-AA
Original New Fuel injection pump, diesel fuel electrical injection pump 729927-51420 for Yanmar, X7, 72992751420, 4TNV98
COMMON RAIL FUEL INJECTION TEST BENCH
-Common Rail Injectors
Continental/ Delphi/ Denso/ BoschCummins
-2700 Rail Pressure for Euro6 / Euro 6.2
- Celect Injectors
-HEUI Injectors
-QSK/ QST Fuel Injectors-
-Common Rail Testing
-Automated Rpm ControL
-AHE Stroke Tester
-RLC Testing-
Injector Short Circuit & Neutral Current Safety Control
NATURE OF DRIVE - A.C. Inverter Drive 10H.P.
MAIN ELECTRIC MOTOR - 10 H.P. (440 volts)
FUEL SUPPLY MOTOR & PUMP - 1.5 H.P (440 volts) with constant flow and fine filtration system
DISPLAY - Tachometer as well as Monitor
R.P.M. RANGE - 0-3000 R.P.M.
PRESSURE GAUGES - 0-7kg/cm², 0-21kg/cm², -1-3kg/cm², 0-42kg/cm²
OIL TANK - Double Tank for Tested Fuel 40 Ltr. With dirty tank 3 Ltr.
R.P.M. CONTROL - By Speed Booster as well as Monitor
FLYWHEEL - 360 mm (Hard Chromed) with Extension (as per Bosch)
SOLENOID OPERATION - Dual Shutter On/Off Operation
CONDENSING FAN UNIT - For maintaining the moderate temp. of Fuel
LUBRICATING PUMP- For Lubrication of tappet assembly with control valve
CLOSE LOOP TEMP. UNIT - For maintaining the auto specific temp. of Testing Fuel
FUEL SUPPLY CONTROL - Pressure control valve & filtration system as per Standard
-CR Pumps Bosch / Denso/ Delphi/ Continental
-CAT HEUI Fuel pumps
-EUI EUP Unit Pumps
-Benz Unit PumpsVOLVO / DAF Unit Injectors
8 Cylinder Equipped with A.C. frequency inverter drive control Panel with the help of potential meter to attain
infinitely Variable speed from 0-3500 R.P.M. in both the directions CW & ACW as well as all the electrical and CRDI System is operated through monitor , keyboard, mouse . The Test Bench is transmitted through 10 HP 440 volts electric
Direct motor (10 H.P. AC Drive) and High Pressure pump supply with soundless gear pump through separate electric motor 1.5 H.P. 440 volts. Equipped with 8 cylinder bi- directional swiveling measuring console. Lubrication with Chiller operated through compressor is inbuilt provided by shielding with Standard Accessories. (120 mm flexible coupling)
